LORDWORLD
LORDWORLD 12V 5A Power Supply Adapter US Plug 4.6FT Cord 5.5x2.5mm Jack
Converts 100-240 V AC to 12 V DC at up to 5 A with a 4.6 ft US cord and 5.5 x 2.5 mm jack
- Delivers stable 12 V DC power for LED strips, lights and CCTV cameras
- 5 A maximum output supports devices up to 60 W without overload
- 6 ft AC cord plus 6.72 ft DC cable gives 205 cm total reach
- Jack fits both 5.5 x 2.5 mm and 5.5 x 2.1 mm sockets for broad compatibility
- Centre-positive polarity matches standard 12 V equipment wiring
Power Supply Adapter 12V 5A
This AC to DC switching adapter delivers 12 volts at up to 5 amps with a maximum rated power of 60 watts. It accepts a wide input range from 100 to 240 volts for global compatibility. The unit includes a US plug and a 4.6 foot power cord. It is designed for 12V DC equipment such as LED strips, lights and CCTV cameras.
Replaces 12V Adapters Under 5A
The adapter upgrades any existing 12V supply that cannot meet a 5 amp or 60 watt demand. The jump is worth it when your device draws more current than the old unit can provide, preventing shutdown or instability. It also replaces supplies with a fixed 5.5 x 2.1 mm tip by accepting both 2.1 mm and 2.5 mm centre pins. Do not use it for devices requiring more than 5 amps or a voltage other than 12V.
Fits 5.5mm Jack Devices
The 205 cm total cable length reaches distant sockets without an extension lead. The barrel plug fits 5.5 mm outer diameter jacks with either 2.5 mm or 2.1 mm inner diameters. Polarity is centre positive, sleeve negative, matching most common DC gear. It frees up a wall outlet by consolidating the transformer and cord into one unit. Not suitable for equipment needing a different voltage, higher current or a locking connector.
Highlights
- Delivers stable 12 V DC power for LED strips, lights and CCTV cameras
- 5 A maximum output supports devices up to 60 W without overload
- 6 ft AC cord plus 6.72 ft DC cable gives 205 cm total reach
- Jack fits both 5.5 x 2.5 mm and 5.5 x 2.1 mm sockets for broad compatibility
- Centre-positive polarity matches standard 12 V equipment wiring
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What length is the DC output cable and which barrel plug sizes does it fit?
The cable is 4.6 feet (205 cm) long and ends with a 5.5 mm x 2.5 mm plug that also fits 5.5 mm x 2.1 mm sockets thanks to the spring centre contact.
How do I connect this adapter safely to avoid polarity damage?
Plug the US mains prongs into a 100-240 V socket, then insert the DC barrel jack so the centre tip (+) meets your device's positive terminal and the sleeve (-) meets the negative terminal.
When should I replace this power supply to keep my equipment running reliably?
Replace it if the output drops below 12 V under load, the unit overheats, the cable shows cracking near the jack, or the connected device draws more than 5 A (60 W) and causes shutdowns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



