We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short black piggyback power cords with NEMA 5-15P plugs and C13 plus 5-15R connectors

LORDWORLD

LORDWORLD 1 ft NEMA 5-15P to C13/5-15R Piggyback Power Cord 14AWG Pack of 2

SKU CH-NQCA-M99CS

One-foot piggyback cord splits a NEMA 5-15P plug into C13 and 5-15R outlets, UL CUL certified at 15 A 125 V with 14 AWG pure-copper conductors, pack of two

  • UL CUL certified for safe 15A 125V operation
  • 14AWG pure copper conductors handle heavy-duty loads
  • Piggyback design adds a C13 outlet without losing the wall socket
  • 100% open short and voltage tested for reliability
  • Pack of two cords simplifies multi-device audio DJ setups

1 ft Piggyback Power Cord for Audio DJ Gear

This pack of two cords lets you connect both a C13 device and a standard 5-15R plug to a single NEMA 5-15P wall outlet. Each 1 ft cable is UL and cUL listed and rated for 15 A at 125 V. The SJT 14 AWG three-conductor construction uses pure copper wire that has been 100 % open, short and voltage tested. They suit pro audio, DJ and stage-lighting rigs where outlet space is tight.

Replaces Bulky Power Strips in Rack and Booth Setups

Instead of adding a separate strip or splitter, the piggyback head converts one NEMA 5-15P receptacle into a C13 outlet plus a pass-through 5-15R socket. The jump is worth it when you need to power a mixer or active speaker and still keep the original outlet free for another piece of gear. It is not for buyers who want more than one extra socket or who need a longer reach than the 1 ft lead provides.

Plug-and-Play Installation With No Tools Required

Simply insert the 5-15P plug into the wall or PDU, then attach the C13 connector to your equipment and use the pass-through for a second device. The moulded strain reliefs resist accidental unplugging during load-in and load-out. What usually goes wrong is forcing the C13 into a C14 inlet that is recessed or misaligned, which can bend pins, so check orientation before applying pressure.

Highlights

  • UL CUL certified for safe 15A 125V operation
  • 14AWG pure copper conductors handle heavy-duty loads
  • Piggyback design adds a C13 outlet without losing the wall socket
  • 100% open short and voltage tested for reliability
  • Pack of two cords simplifies multi-device audio DJ setups

Specifications

BrandLORDWORLD

Questions about this item

What plug spacing does the piggyback connector need on my power strip?

The cord ends in a NEMA 5-15R outlet and a C13 socket on a single moulded block, so the strip must accept a standard US three-prong plug and a C14 inlet side-by-side.

Which end goes into the wall and which end feeds my gear?

Insert the NEMA 5-15P male plug into the 125 V wall receptacle; the piggyback head then provides one NEMA 5-15R outlet and one C13 socket for your equipment.

When should I replace the cord based on its 14 AWG rating?

Replace it if the jacket shows cracks, the pins become loose, or the cord feels warm during normal 15 A use, as 14 AWG copper is rated for that continuous load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.