We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short grey cable with a three-prong plug on one end and a four-prong socket on the other plus a green grounding wire

LORDWORLD

LORDWORLD 1.5-Foot 30A 10-30P to 14-30R Dryer Adapter Cord with Grounding Wire

SKU CH-BGTV-7RN5B

Connects a 4-prong dryer to a 3-prong 30A outlet using 10-AWG copper cable with a separate grounding wire for safe operation up to 7500 watts

  • Connects 4-prong dryer to 3-prong wall socket via NEMA 10-30P to 14-30R adapter
  • Extra green grounding wire attaches to standard 15A or 20A 125V outlet for safety
  • 10-AWG STW cord with 100% copper conductors handles up to 7500 watts reliably
  • Compact 1.5-foot length (about 45 cm) fits tight laundry spaces neatly
  • Passes 100% safety and durability testing for dependable operation

Adapter cord for dryer plug conversion

This adapter connects a four-prong dryer plug to a three-prong wall outlet rated at 30 amps. It suits owners of newer dryers who move into homes with older NEMA 10-30R receptacles. The cord is 1.5 feet long and uses 10-AWG STW copper wire for a secure connection.

Sustained load capacity and grounding

The cord supports up to 7500 watts at 250 volts through 100 percent copper conductors. A separate green grounding wire with a round terminal must be attached to a 15-amp or 20-amp 125-volt household outlet to provide the ground path that the 10-30R socket lacks. All units pass 100 percent safety and durability testing.

Installation steps and common issues

Plug the NEMA 10-30P male end into the wall socket and the dryer's NEMA 14-30P plug into the adapter's female receptacle. The most frequent problem is forgetting to connect the green ground wire to a grounded 125-volt outlet, which leaves the dryer chassis ungrounded. The short 45-centimetre length may require the dryer to sit close to the wall.

Highlights

  • Connects 4-prong dryer to 3-prong wall socket via NEMA 10-30P to 14-30R adapter
  • Extra green grounding wire attaches to standard 15A or 20A 125V outlet for safety
  • 10-AWG STW cord with 100% copper conductors handles up to 7500 watts reliably
  • Compact 1.5-foot length (about 45 cm) fits tight laundry spaces neatly
  • Passes 100% safety and durability testing for dependable operation

Specifications

BrandLORDWORLD

Questions about this item

Does the adapter cord generate noticeable heat when the dryer runs at the full 7500-watt rating all day?

The 10-AWG STW cord uses 100 percent copper conductors rated for 30 amps, so it handles the continuous 7500-watt load without excessive heat buildup.

What existing outlet and grounding source must I already have for this adapter to work safely?

You need a Nema 10-30R three-prong dryer wall socket plus a separate 15-amp or 20-amp 125-volt household outlet, power strip or extension cord to accept the green grounding wire’s round terminal.

Will my older three-prong dryer plug fit the 14-30R receptacle on this adapter?

No, the female end is a four-prong Nema 14-30R designed for a modern 14-30P dryer plug; a legacy three-prong dryer cord will not mate with it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.