Loos & Co., Inc.
Loos & Co., Inc. MS20668-6 Eye End Fitting 3/16 in Rope Stainless Steel
Stainless steel swage eye end fitting for 3/16 in rope, DFARS and MIL-DTL-781 compliant
- TypeWheelbarrows & Carts
- Stainless steel resists corrosion for long outdoor life
- DFARS compliant and meets MIL-DTL-781 for critical applications
- 3/16 inch rope diameter suits light rigging tasks
- 5/16 inch eye diameter accepts standard hardware
- Swaged fitting type provides secure permanent termination
Stainless steel eye end fitting for 3/16 in rope
The Loos & Co. MS20668-6 eye end fitting is manufactured from stainless steel and designed for use with 3/16 inch diameter galvanized or stainless steel rope. It provides a permanent swaged termination suitable for lifting applications. The component meets MIL-DTL-781 and DFARS compliance standards for military and defence use.
Swaged termination creates a permanent
Swaging the fitting onto the rope forms a secure, non-slip connection that eliminates the need for mechanical clips or thimbles. The 5/16 inch eye inside diameter accepts standard hooks, shackles or pins, while the 1/4 inch eye thickness distributes bearing stress across the hardware. The 23/64 inch shank diameter matches the swaged outside dimension for a uniform profile.
Rated for lifting with 3/16 in rope in compliant
This fitting comfortably handles lifting loads within the working limits of 3/16 inch stainless or galvanized steel rope when swaged to the specified 5/16 inch outside diameter. It runs out when rope diameter, material or construction deviates from the compatible specifications, or when an application requires a threaded, swivel or hook-type termination instead of a fixed eye.
Highlights
- Stainless steel resists corrosion for long outdoor life
- DFARS compliant and meets MIL-DTL-781 for critical applications
- 3/16 inch rope diameter suits light rigging tasks
- 5/16 inch eye diameter accepts standard hardware
- Swaged fitting type provides secure permanent termination
Specifications
| Brand | LOOS |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How often will the 3/16 in stainless steel eye end fitting need inspection or replacement?
Inspect the fitting regularly for wear, corrosion or deformation; replace it if the eye thickness of 1/4 in or shank diameter of 23/64 in shows measurable reduction.
What is the first limit reached under sustained lifting loads?
The MIL-DTL-781 rated lifting capability defines the maximum safe working load; exceeding it risks permanent deformation of the swaged 5/16 in outside diameter.
Does the stainless steel fitting generate heat or noise during continuous daily use?
As a static rigging component with no moving parts, it produces no operational noise or heat regardless of duty cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
