LONGER
LONGER RAY5 20W Laser Engraver Kit 440mm Honeycomb Air Assist Rotary Camera 16 Risers
A 20W laser engraver with a 0.08x0.1mm compressed beam, 10000mm/min speed, adjustable air assist, 440mm honeycomb table, 4-in-1 rotary roller, 5MP camera covering 740x560mm, and 16 riser pads
- High-precision engraving with a 0.08x0.1mm compressed beam at speeds up to 10000mm/min
- Cleaner cuts and lens protection via adjustable 10-30L/min air assist paired with a 440mm honeycomb table
- Engrave cylinders, wine glasses and irregular objects using the 4-in-1 rotary roller with 16 riser pads
- Accurate auto-positioning and job preview over a 740x560mm area with the 5MP LightBurn camera kit
- Ready to work on metal colouring, acrylic, wood, glass and leather straight out of the box
Complete Laser Engraving Kit
The Longer RAY5 20W Laser Engraver arrives as a full kit with a 440mm honeycomb table, air assist, 4-in-1 rotary roller, camera kit and 16 riser pads. It targets hobbyists and small workshops that want cutting and engraving on metal, acrylic, wood, glass and leather without sourcing accessories separately. The compressed beam measures 0.08x0.1mm for fine detail work.
Upgrade From Basic Diode Units
This kit replaces entry-level engravers that lack integrated air assist, rotary capability or camera positioning. The jump is worth it when you need adjustable 10-30L/min airflow to clear smoke, a rotary extender for cylindrical objects like wine glasses, and a 5MP camera covering a 740x560mm area for auto positioning and job preview. Buyers who only need flat-sheet cutting on a small desktop may not use the rotary or camera features.
Sustained Operation With Active Cooling
The honeycomb working table provides quick heat dissipation during long cuts, protecting both the workpiece and the desktop surface. Air assist runs continuously at low noise to keep the lens clean over extended sessions. The precise rails maintain accuracy at speeds up to 10000mm/min without drift during multi-hour jobs. The riser pads allow height adjustment for thicker materials throughout a production run.
Highlights
- High-precision engraving with a 0.08x0.1mm compressed beam at speeds up to 10000mm/min
- Cleaner cuts and lens protection via adjustable 10-30L/min air assist paired with a 440mm honeycomb table
- Engrave cylinders, wine glasses and irregular objects using the 4-in-1 rotary roller with 16 riser pads
- Accurate auto-positioning and job preview over a 740x560mm area with the 5MP LightBurn camera kit
- Ready to work on metal colouring, acrylic, wood, glass and leather straight out of the box
Specifications
No published specifications for this item yet.
Questions about this item
How much desk depth does the 440 mm honeycomb panel require?
The honeycomb working table measures 440 mm square, so allow at least that depth plus clearance for the air-assist hose and cable routing.
What is the correct sequence for attaching the 4-in-1 rotary roller to the RAY5 rails?
Mount the rotary extender with its included riser onto the precise rails first, then level it before connecting the motor cable; skipping the leveling step causes misaligned cylindrical engravings.
How often should the air-assist nozzle and honeycomb cells be cleaned when cutting acrylic or wood?
Clean the nozzle and honeycomb after every few jobs because the 10–30 L/min airflow deposits residue that degrades the 0.08 × 0.1 mm beam quality over time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
