Loctite
Loctite Lithium Grease Aerosol 10.75 oz White
Multipurpose lithium grease in a 10.75 oz aerosol can, rated to 380 °F with a 320 °F flash point
- Multipurpose lubrication for metal and plastic parts with lithium-thickened formula
- Withstands temperatures up to 380 °F for high-heat applications
- Aerosol can delivers 10.75 oz of grease for easy, targeted application
- White colour lets you see coverage and contamination at a glance
- Flash point of 320 °F adds safety margin in hot environments
Loctite Lithium Grease 10.75 oz Aerosol
This multipurpose lubricant uses a lithium thickener in a mineral base oil to protect metal surfaces. The white grease meets NLGI Grade 2 consistency and comes in a 10.75 oz aerosol can for easy application.
Mechanics needing general-purpose lubrication
This product suits workshops maintaining bearings, hinges, and sliding mechanisms where a white grease is preferred. It is not for buyers who require a grease with a certified NSF rating for food-contact environments or a specific Timken OK load value.
Maximum operating temperature 380 degrees F
The grease withstands temperatures up to 380 degrees F with a flash point of 320 degrees F. This thermal limit determines whether the lubricant survives your specific high-heat application.
Highlights
- Multipurpose lubrication for metal and plastic parts with lithium-thickened formula
- Withstands temperatures up to 380 °F for high-heat applications
- Aerosol can delivers 10.75 oz of grease for easy, targeted application
- White colour lets you see coverage and contamination at a glance
- Flash point of 320 °F adds safety margin in hot environments
Specifications
| Brand | LOCTITE |
|---|
Questions about this item
What tools or fittings do I need to apply the 10.75 oz aerosol can?
The product is a self-contained aerosol can with a built-in spray nozzle, so no separate applicator gun, hose or fitting is required.
Will this lithium grease damage older rubber seals or painted surfaces on my equipment?
The grease is a mineral-oil-based NLGI Grade 2 lithium formulation; mineral oil is generally compatible with most common seal materials and cured paints, but always test a small hidden area first.
How can I confirm the grease is performing correctly after I spray it on a bearing?
After application the white film should coat surfaces evenly, stay in place up to the 380 °F maximum operating temperature and not drip or carbonise below the 320 °F flash point.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
