Loctite
Loctite 2343777 Penetrating Lubricant 400 ml Aerosol Spray
Penetrating lubricant in a 400 ml aerosol spray can with mineral oil base, operating from -38 to 113 degrees Fahrenheit and 8 percent VOC content
- Loosens seized fasteners fast with penetrating mineral oil formula
- Works in extreme cold down to -38 °F for winter repairs
- Withstands heat up to 113 °F without breaking down
- Large 400 ml aerosol can covers big jobs in one go
- Low 8 % VOC content meets strict air-quality rules
Loctite 2343777 Penetrating Lubricant
This 400 ml aerosol spray delivers mineral-oil-based penetrating lubricant for freeing seized fasteners and displacing moisture. It operates reliably between -38 °F and 113 °F and carries a flash point of 58 °F. The formulation contains 8 percent VOC content and is not rated for NSF certification.
Mechanics tackling rusted bolts
Technicians who need a product approved for food-processing environments should look elsewhere because this lubricant is not NSF rated. Buyers requiring a VOC-compliant formula for all 50 states will also need a different product since this one does not meet that standard.
Workshop consumable for general maintenance
The aerosol can fits standard tool-chest storage and requires no additional dispensing equipment. Its flammable Category 2 classification means it must be kept away from ignition sources during use and storage. The mineral oil base leaves a residual film that helps protect exposed metal surfaces after application.
Highlights
- Loosens seized fasteners fast with penetrating mineral oil formula
- Works in extreme cold down to -38 °F for winter repairs
- Withstands heat up to 113 °F without breaking down
- Large 400 ml aerosol can covers big jobs in one go
- Low 8 % VOC content meets strict air-quality rules
Specifications
| Brand | LOCTITE |
|---|
Questions about this item
Does the Loctite 2343777 aerosol can work with standard spray nozzles, or do I need a specific attachment?
The 400 ml aerosol can uses a standard built-in nozzle; no separate attachment is required to apply the penetrating lubricant.
Can I use this mineral-oil penetrating lubricant on older fasteners that have been treated with other oils or greases?
Yes, the mineral-oil formula penetrates through existing residues on older hardware without adverse reaction.
How can I confirm the spray is performing correctly after I apply it to a seized bolt?
The lubricant should creep into threads within minutes, and the flash point of 58 Degrees F indicates normal flammability for a mineral-oil aerosol.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
