Loctite
Loctite 1197606 Mixing Nozzle 10 PK
A 10-pack of stepped-taper mixing nozzles with 16 elements for 1:1 and 2:1 ratio 12 mL dual anaerobic cartridges
- Designed for 12 mL dual anaerobic cartridges
- 16 mixing elements ensure thorough adhesive blending
- 1:1 and 2:1 ratios cover common Loctite formulations
- Stepped taper nozzle provides controlled application flow
- Pack of 10 nozzles keeps production running
Precision Mixing Nozzles for Dual Cartridges
This pack contains ten Loctite 1197606 mixing nozzles designed for 12 mL dual anaerobic cartridges. The stepped taper nozzle with a 2.5 mm inner diameter delivers consistent blending for threadlocking applications. Each nozzle features sixteen mixing elements to ensure thorough material combination before dispensing. They are compatible with Loctite 2046 Threadlocker and manufacturer part number 1186840.
Fixed Ratio Stepped Taper Design
The nozzles support both 1:1 and 2:1 mixing ratios without adjustment, eliminating the need for separate tips per formulation. Sixteen static elements provide reliable homogenisation of two-part anaerobics directly in the tip. The stepped taper profile fits standard 12 mL dual cartridge outlets, reducing cross-contamination between jobs. Ten pieces per pack allow single-use disposal to maintain bond integrity.
Technicians Applying Anaerobic Threadlockers
Maintenance teams and assembly technicians using Loctite 2046 or similar dual-cartridge anaerobics will find these nozzles a direct fit. Buyers needing larger cartridge compatibility or different mixing ratios should verify specifications before purchase. Users requiring reusable mixing systems or non-stepped outlet geometries will need alternative dispensing accessories.
Highlights
- Designed for 12 mL dual anaerobic cartridges
- 16 mixing elements ensure thorough adhesive blending
- 1:1 and 2:1 ratios cover common Loctite formulations
- Stepped taper nozzle provides controlled application flow
- Pack of 10 nozzles keeps production running
Specifications
| Brand | LOCTITE |
|---|
Questions about this item
When should I replace the mixing nozzle on my 12 mL dual anaerobic cartridge?
Replace the nozzle after each use or when cured adhesive blocks the 2.5 mm internal diameter, preventing proper mixing of the Loctite 2046 threadlocker.
What limits continuous use of the stepped-taper nozzle design?
The 16-element static mixer is single-use; once adhesive cures inside the 2 2/5 inch length, the 1:1 and 2:1 mixing ratios can no longer be achieved.
Does the nozzle add heat or resistance during extended dispensing?
The plastic stepped-taper nozzle adds no heat; it simply channels mixed adhesive from the 12 mL cartridge through 16 elements at the cartridge's own dispensing pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
