Loctite
Loctite 1108758 Anchor Bolt Grout HP 21 oz Dual Cartridge Gray 7363
Dual-cartridge 21 oz gray grout paste for anchoring bolts in concrete and masonry, with 20-minute working time and 4-hour full cure
- TypeSealing Compound
- 20-minute working time allows precise anchor placement
- 4-hour full cure delivers rapid structural strength
- 21 oz dual cartridge ensures accurate 1:1 mixing
- Gray paste bonds concrete and masonry surfaces
- Meets ASTM and OSHA standards for code compliance
Anchor Bolt Grout HP Kit
The Loctite 1108758 Anchor Bolt Grout HP Kit is a two-part sealing compound supplied in a 21 oz dual cartridge. It is formulated for grouting anchor bolts into concrete and masonry substrates. The gray paste delivers structural bonding for heavy-duty fastening applications in construction and maintenance settings.
Replaces loose mechanical anchors
This grout replaces installations that rely on expansion anchors alone by filling voids and distributing load across the full embedment depth. The upgrade is worthwhile when vibration, dynamic loads or oversized holes reduce the holding power of mechanical fixings. A 1:1 mixing ratio and 20 minute working time allow efficient placement before the 4 hour full cure at standard temperatures.
Check substrate temperature
Verify the base material temperature falls between 2 degrees C and 46 degrees C before dispensing. Ensure the dispensing tool accepts dual cartridges with a 1:1 ratio and that the nozzle reaches the bottom of the drilled hole. Confirm the hole is clean and dry to meet ASTM and OSHA referenced standards for structural grouting.
Highlights
- 20-minute working time allows precise anchor placement
- 4-hour full cure delivers rapid structural strength
- 21 oz dual cartridge ensures accurate 1:1 mixing
- Gray paste bonds concrete and masonry surfaces
- Meets ASTM and OSHA standards for code compliance
Specifications
| Type | Sealing Compound |
|---|---|
| Brand | LOCTITE |
Questions about this item
What size cartridge fits the Loctite 1108758 dual cartridge dispenser?
The product is supplied as a 21 oz dual cartridge, so the dispenser must accept that exact cartridge size and 1:1 mixing ratio.
How do I install the anchor bolt grout and what step is often missed?
Dispense both components through a static mixing nozzle to achieve a uniform gray paste, then place the anchor within the 20 min working time; skipping the nozzle gives an incomplete mix.
When will the grout need replacement after the anchor is set?
Once fully cured at 4 hr the grout becomes a permanent bond; no scheduled replacement is required unless the anchor is removed or the concrete fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
