Loctite
Loctite 1100962 Mixing Nozzle White 20 Elements PK3
Threaded mixing nozzle for 300 mL two-component epoxy cartridges, 10 in overall length with 20 elements and 11.2 mm square ID, pack of three
- Designed for two-component epoxy cartridges up to 300 mL
- 20 mixing elements ensure thorough blending of adhesive components
- Threaded 7/8-9 end fits compatible dispensing guns securely
- 2 mm square internal diameter optimises material flow
- Pack of three nozzles provides multiple application sessions
Loctite 1100962 Mixing Nozzle for 300 mL Cartridges
The Loctite 1100962 mixing nozzle is designed for dispensing two-component epoxy from 300 mL cartridges. It suits technicians and maintenance teams who require consistent mixing ratios for structural bonding or repair work. Each pack contains three nozzles, each fitted with twenty mixing elements. The threaded 7/8-9 end connects directly to compatible cartridge systems.
Consistent Mixing Through Twenty Static Elements
The twenty white mixing elements divide and recombine the epoxy streams repeatedly as material travels the 10 in length. This geometry produces a uniform blend without relying on operator technique, reducing the risk of soft spots or incomplete cure in structural joints. Performance remains repeatable across the full cartridge volume because the flow path does not change with use.
Threaded Connection and Square Bore for Secure Fit
A 7/8-9 threaded end locks the nozzle onto the cartridge outlet, preventing blow-off under dispensing pressure. The 11.2 mm square internal bore matches the cartridge’s mixing chamber profile, eliminating bypass channels that would leave unmixed resin. The white body allows visual confirmation of blend quality before application begins.
Highlights
- Designed for two-component epoxy cartridges up to 300 mL
- 20 mixing elements ensure thorough blending of adhesive components
- Threaded 7/8-9 end fits compatible dispensing guns securely
- 2 mm square internal diameter optimises material flow
- Pack of three nozzles provides multiple application sessions
Specifications
| Brand | LOCTITE |
|---|
Questions about this item
Does the 10 in overall length change heat build-up when the nozzle runs all day?
The 10 in overall length gives a longer flow path that helps two-component epoxy mix thoroughly before it exits, reducing blockages that can cause back-pressure and heat during extended use.
What cartridge size and thread must I already own for the 7/8-9 threaded end to fit?
You need 300 mL cartridges with a 7/8-9 thread so the nozzle screws on directly and the 11.2 mm square ID aligns with the cartridge outlet.
Will the 20 elements work with older Loctite 300 mL cartridges I already keep?
Yes, the 20 elements and 7/8-9 threaded end match the same 300 mL cartridge specification used on earlier Loctite two-component epoxy cartridges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
