Loc-Line
Loc-Line 60533 Fixed Mount 3/4 in PK2 fluid
Two acetal copolymer fixed mounts with ¼ in. bolt holes secure ¾ in. flex hose systems and resist common shop chemicals
- Fixed mount secures 3/4 in hose systems
- Acetal copolymer resists chemicals and solvents
- 1/4 in bolt hole allows direct installation
- Package includes two mounts for dual setup
- Compatible with 3/4 in flex hose systems
Loc-Line 60533 Fixed Mount for 3/4 Inch Hose
The Loc-Line 60533 is a fixed mount designed to secure 3/4 inch inside diameter flex hose systems in industrial or machine shop environments. It is sold as a pack of two acetal copolymer mounts for positioning coolant or lubricant lines.
Mounting limited to 1/4 inch bolt hole pattern
Each mount requires a 1/4 inch bolt hole for installation, restricting attachment points to that specific fastener size. The acetal copolymer body resists exposure to acetone, alcohol, ethyl alcohol, commercial dish detergents, gasoline, grease, lacquer solvents, oils and sodium hydroxide.
Verify hose system uses 3/4 inch inside diameter
Confirm your existing flex hose system matches the 3/4 inch inside diameter specification before ordering. Ensure the 1/4 inch bolt hole pattern aligns with your machine mounting points and that acetal copolymer suits the chemicals in your application.
Highlights
- Fixed mount secures 3/4 in hose systems
- Acetal copolymer resists chemicals and solvents
- 1/4 in bolt hole allows direct installation
- Package includes two mounts for dual setup
- Compatible with 3/4 in flex hose systems
Specifications
| Brand | LOC-LINE |
|---|
Questions about this item
Should I choose the two-pack of 3/4-inch fixed mounts or look for a different quantity?
The package contains two mounts, each sized for 3/4-inch inside-diameter hose with a 1/4-inch bolt hole, so the two-pack is the only quantity offered for this model.
What does the 3/4-inch hose size mean when the mount is installed on my machine?
It means the mount accepts Loc-Line flex hose with a 3/4-inch internal bore, giving a secure anchor point for coolant or air lines at that diameter.
The mount uses a 1/4-inch bolt hole — what does that cap in practice?
The 1/4-inch bolt hole limits mounting to fasteners of that size, so you will need a matching bolt or screw to secure the acetal copolymer base to your fixture.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
