We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic swivel nozzles with small round tips

Loc-Line

Loc-Line 51845 Swivel Nozzle 75 98° 60 psi 170°F 0.08 in hole pack of 2

SKU CH-A9MF-DD00D MPN 51845

Adjustable swivel nozzle directs flow up to 98° at 60 psi and 170°F with a 0.08 in hole, sold as a pair

  • TypeDrain Components
  • Swivel action directs coolant up to 98°
  • 60 psi rating handles shop-air pressure
  • 170 °F limit suits hot machining cycles
  • 08 in orifice gives fine targeted flow
  • Pack of two nozzles covers multiple setups

Swivel Nozzle for Coolant Delivery

The Loc-Line 51845 is a swivel nozzle designed for precise coolant or lubricant delivery in machining and industrial settings. It connects via a non-threaded half-inch diameter and features a 0.08 in hole for focused flow. The nozzle swings up to 98 degrees for adjustable positioning. It operates at temperatures up to 170 degrees Fahrenheit and pressures up to 60 psi.

Compatibility and Limitations

This nozzle suits operators needing directional coolant control on compatible Loc-Line modular hose systems. It works with lubricants including acetone, alcohol, dish detergents, ethyl alcohol, gasoline, grease, lacquer solvents, oils, and sodium hydroxide. Builders requiring threaded connections or larger orifice sizes for higher volume flow should look at alternative components.

Critical Specification

The 0.08 inch hole diameter determines the flow rate and spray pattern for the application. The 98 degree swing angle defines the range of motion available for positioning the stream. The 60 psi pressure rating sets the maximum safe operating limit for the system.

Highlights

  • Swivel action directs coolant up to 98°
  • 60 psi rating handles shop-air pressure
  • 170 °F limit suits hot machining cycles
  • 08 in orifice gives fine targeted flow
  • Pack of two nozzles covers multiple setups

Specifications

TypeDrain Components
BrandLoc-Line
Model51845

Questions about this item

How much heat can the Loc-Line 51845 swivel nozzle handle during continuous daily operation?

The nozzle is rated for a maximum operating temperature of 170°F, so it will tolerate hot fluids or ambient heat up to that level without degrading.

What hose or fitting must I already have to connect the 1/2 in non-threaded connection on this nozzle?

You need a Loc-Line 1/2 in hose segment or compatible push-fit tubing that matches the 1/2 in non-threaded connection diameter for a secure, leak-free fit.

Will the 0.08 in hole diameter on this nozzle work with the same flow rate as my older 1/4 in Loc-Line nozzles?

The 0.08 in hole is significantly smaller than a 1/4 in opening, so flow will be reduced; expect a finer, more concentrated stream rather than the higher volume of the older nozzles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.