LITHONIA LIGHTING
LITHONIA LIGHTING TWX2 LED ALO 40K MVOLT DDBTXD Size 2 Wallpack
LED wall pack with adjustable output delivers 6,850 lumens at 4000K, replaces up to 400W HID, IP65 rated, 100,000-hour life
- TypeOutdoor Lighting
- Adjustable output set at installation for tailored illumination
- 6,850 lumens at 4000K with 80 CRI for bright neutral light
- 127 lumens per watt reduces energy versus metal halide
- IP65 die-cast aluminum housing withstands outdoor conditions
- 100,000-hour rated life minimises maintenance cycles
Outdoor LED wall pack with adjustable output
The LITHONIA LIGHTING TWX2 LED ALO 40K MVOLT DDBTXD is an LED wall pack designed for outdoor surface-mount applications. It delivers 6850 lumens at 4000K with a Type III distribution. The fixture operates on 120 to 277V AC and replaces 70W to 400W HID luminaires.
Sustained operation at 54 watts
The unit runs at 54W lamp watts with an efficacy of 127 lumens per watt. An IP65 rating protects the bronze die-cast aluminum housing and borosilicate glass lens against dust and water jets. Service life is rated at 100000 hours for long-term reliability.
Adjustable light output set during installation
The ALO feature allows installers to set the required light level on site. Mounting uses a 1/2 in NPT hub with three 1/2 in knockouts. Recommended maximum mounting height is 1. Buyers needing a different colour temperature or distribution pattern should consider other models.
Highlights
- Adjustable output set at installation for tailored illumination
- 6,850 lumens at 4000K with 80 CRI for bright neutral light
- 127 lumens per watt reduces energy versus metal halide
- IP65 die-cast aluminum housing withstands outdoor conditions
- 100,000-hour rated life minimises maintenance cycles
Specifications
| Brand | LITHONIA LIGHTING |
|---|---|
| Type | Outdoor Lighting |
Questions about this item
How much heat and power does the 54W LED wall pack generate during all-day operation?
The fixture draws 54 watts and delivers 127 lumens per watt, so most energy becomes light rather than heat; the IP65-rated die-cast aluminum housing dissipates the remainder without active cooling.
What electrical supply must already be on site for the MVOLT driver to work?
A 120 to 277V AC circuit is required; the built-in multi-volt driver accepts any voltage in that range without rewiring.
Will the Type III pattern and 6,850-lumen output match the spread of the 250W metal halide wall pack I am replacing?
Yes — the adjustable lumen output is factory-set to 6,850 lumens with a Type III distribution, designed to directly replace 70W to 400W HID luminaires including 250W metal halide units.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Every Day Carry Hook-and-Loop Belt Pouch Leaf Camo 11cm
- Multi
- Multi-Color



