We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
44-1/2 inch linear LED magnetic retrofit kit with frosted lens

Litetronics

Litetronics RFM2T440A 44-1/2" LED Magnetic Retrofit Kit 30W

SKU CH-R2NP-D8ZX8

A 44-1/2 inch LED magnetic retrofit kit replaces three T8 lamps with 30 watts and up to 4,700 lumens at 4,000K

  • Replaces three T8 lamps with a single 30 W LED kit
  • Delivers up to 4,700 lumens at 156 lm/W efficacy
  • Operates on 120 to 277 V AC without rewiring ballasts
  • Dimmable control allows adjustable light levels for task needs
  • DLC listed with 82 CRI for reliable colour quality

LED Magnetic Retrofit Kit

The Litetronics RFM2T440A is a 44-1/2 inch LED magnetic retrofit kit designed to replace three-lamp T8 fluorescent fixtures. It operates at 30 W maximum fixture wattage on 120/277V AC power and produces a 4,000 K colour temperature.

DLC Certification and Dimming

DesignLights Consortium certification confirms the kit meets recognised energy-efficiency and performance standards for utility rebate programmes. The integrated driver supports dimming control, allowing light levels to be adjusted without an emergency battery backup or onboard sensor.

Suited for Linear Fluorescent Replacements

This kit suits facility managers upgrading 1 ft by 4 ft troffers or strip fixtures where magnetic mounting simplifies installation. Buyers needing emergency battery backup, integrated occupancy sensing or a different colour rendering index above 82 should look at alternative solutions.

Highlights

  • Replaces three T8 lamps with a single 30 W LED kit
  • Delivers up to 4,700 lumens at 156 lm/W efficacy
  • Operates on 120 to 277 V AC without rewiring ballasts
  • Dimmable control allows adjustable light levels for task needs
  • DLC listed with 82 CRI for reliable colour quality

Specifications

BrandLITETRONICS

Questions about this item

Will the magnetic strips or the 30 W driver need replacement first?

The kit uses a 30 W driver and magnetic mounting; driver life typically limits long-term service.

What caps the output during continuous operation — the 156 lm/W efficacy or the 30 W ceiling?

The 30 W maximum fixture wattage is the hard limit; efficacy only affects how many lumens that power produces.

How warm and loud does the 120/277 V driver run after hours of use?

The driver is silent and runs warm but within normal limits for a 30 W LED retrofit.

More in Light Fixtures & Lamp Holders

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.