Linsoul KZ ZS10 PRO In-Ear Monitor, 4BA+1DD Hybrid, 304 Stainless Steel Faceplate, Dark Black
Hybrid 4BA+1DD in-ear monitors with a 10 mm dynamic driver, 304 stainless-steel faceplate and detachable gold-plated ODC cable
- TypeIn-Ear
- ColorDark Black
- Driver Unit10 millimeters
- Frequency Response5Hz-40KHz
- THDIn Ear
- Input Impedance24 ohms
- Hybrid 4BA+1DD array extends highs beyond 40kHz
- 304 stainless steel faceplate resists wear and adds elegance
- 111 dB sensitivity drives loud, clear sound from portable sources
- Detachable 0.75 mm gold-plated pins allow cable upgrades
- 24 ohm impedance matches phones and DAPs without extra power
Hybrid Driver Configuration
The KZ ZS10 PRO combines five drivers in each earpiece: two 30095 balanced armatures for highs, two 50060 balanced armatures for mids, and a 10 millimetre double magnetic dynamic unit for bass. This hybrid array is engineered to deliver a wide frequency response from 5 Hz to 40 kHz with a sensitivity of 111 decibels and an input impedance of 24 ohms.
3.5 mm Wired Connection
The earphones terminate in a standard 3.5 mm plug and ship with a detachable 6N OFC cable measuring 1.25 metres. The cable uses self-developed 0.75 mm gold-plated pins that slot into a limit-protection design on the resin cavity, reducing the risk of pin damage and allowing cable replacement or upgrades without tools.
Stainless Steel Faceplates
Each earpiece features a 304 stainless steel faceplate bonded to an imported resin cavity, giving a combined weight of 30 grams per pair. The metal faceplate adds structural rigidity and a dark black finish, while the resin body shapes the acoustic chamber for the PCB dividing board that coordinates the five drivers.
Highlights
- Hybrid 4BA+1DD array extends highs beyond 40kHz
- 304 stainless steel faceplate resists wear and adds elegance
- 111 dB sensitivity drives loud, clear sound from portable sources
- Detachable 0.75 mm gold-plated pins allow cable upgrades
- 24 ohm impedance matches phones and DAPs without extra power
Specifications
| Brand | Linsoul |
|---|---|
| Model | KZ ZS10 PRO, KZ ZS10 Pro, ZS10 PRO |
| Part Number | ZS10 PRO |
| Type | In-Ear |
| Color | Dark Black |
| Driver Unit | 10 millimeters |
| Frequency Response | 5Hz-40KHz |
| THD | In Ear |
| Input Impedance | 24 ohms |
| Signal to Noise Ratio(SNR) | 111 decibels |
| Power Supply | false |
| Sensitivity | 111 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Cord Length | User Manual |
| Weight | 30 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | ~2K ohm |
| Microphone Frequency Response | 40Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 111 decibels |
| Microphone Sensitivity | 111 decibels |
| Features | sound_isolation, 5, Detachable, Media Control, push_button, Wired, In Ear, hybrid_driver, 24 ohm, Ear Cushions |
| Package Contents | Ear Cushions, Cable, User Manual |
Questions about this item
How does the 40 kHz top end affect real-world listening?
The 5 Hz–40 kHz range extends beyond typical hearing, so harmonics and air are reproduced without roll-off, giving cymbals and strings extra shimmer.
What does the 3.5 mm connector limit in practice?
The 3.5 mm plug caps output to the source device’s headphone amp; maximum volume and damping depend on that amp, not the IEMs themselves.
What physical space does the 304 stainless steel faceplate need to sit securely?
The resin cavity and steel faceplate are built for standard ear anatomy; over-ear cable routing and multiple tip sizes ensure a stable seal without extra mounting hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Case Logic
Case Logic 2.4A Dual USB Wall Charger with Micro-USB Cable - Black
$14.99
0.00017871BTC
In stock