Linsoul KZ ZS10 Pro 4BA+1DD Hybrid IEM Black 3.5mm
Five-driver hybrid in-ear monitors with stainless-steel faceplates and a detachable 1.25 m cable deliver detailed sound up to 40 kHz
- TypeIn-Ear
- ColorBlack
- Driver Unit10 millimeters
- Frequency Response5Hz-40KHz
- THDIn Ear
- Input Impedance24 ohms
- 5-driver hybrid array extends treble to 40 kHz
- Stainless-steel 304 faceplate resists wear
- Detachable 1.25 m gold-plated cable enables upgrades
- 111 dB sensitivity drives loud volume from 24 Ω
- 10 mm dynamic unit anchors deep bass
Hybrid Driver Configuration
The KZ ZS10 Pro is a wired in-ear monitor using a hybrid 4BA+1DD architecture. Four balanced armatures (two 30095 for highs, two 50060 for mids) pair with a 10 mm second-generation double magnetic dynamic driver. It targets musicians and listeners who want detailed resolution and extended high-frequency response up to 40 kHz. The stainless steel faceplate and resin cavity provide a durable, premium build.
Source Compatibility Check
The earphones terminate in a 3.5 mm plug and present a 24 ohm load with 111 dB sensitivity. Verify that your player, phone adapter, or interface provides a standard 3.5 mm output jack. The package includes a detachable 6N OFC cable (1.25 m ± 0.05 m) with 0.75 mm gold-plated pins; ensure any replacement cable uses the same 2-pin connector geometry. This specific unit is the without-mic variant.
Passive Isolation and Efficiency
With no battery or active circuitry, thermals and fan noise are non-existent. The sound_isolation design attenuates ambient noise passively once a proper seal is achieved with the included tips. The high 111 dB sensitivity means most portable sources drive them to loud levels with minimal voltage, so power draw from the source remains negligible. The lightweight 0.06 kg build reduces ear fatigue during long sessions.
Highlights
- 5-driver hybrid array extends treble to 40 kHz
- Stainless-steel 304 faceplate resists wear
- Detachable 1.25 m gold-plated cable enables upgrades
- 111 dB sensitivity drives loud volume from 24 Ω
- 10 mm dynamic unit anchors deep bass
Specifications
| Brand | Linsoul |
|---|---|
| Series | 1 |
| Model | KZ ZS10 PRO, KZ ZS10 Pro |
| Part Number | KZ ZS10 PRO |
| Type | In-Ear |
| Color | Black |
| Driver Unit | 10 millimeters |
| Frequency Response | 5Hz-40KHz |
| THD | In Ear |
| Input Impedance | 24 ohms |
| Signal to Noise Ratio(SNR) | 111 decibels |
| Power Supply | false |
| Sensitivity | 111 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Weight | 0.06 kilograms |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Battery | 0 years |
| Operating Time | 0 years |
| Microphone Impedance | ~2K ohm |
| Microphone Frequency Response | 40Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 111 decibels |
| Microphone Sensitivity | 111 decibels |
| Features | sound_isolation, 0 years, Detachable, Noise Control, remote, Wired, In Ear, hybrid_driver, 24 ohm |
Questions about this item
What comes inside the box and does the cable have a microphone?
The package includes the KZ ZS10 Pro earpieces with stainless steel faceplates and a detachable 1.25m 6N OFC cable using 0.75mm gold-plated pins. The supplier offers a choice of cable with or without an inline microphone.
Which driver configuration should I choose for detailed mids and extended highs?
This model uses a fixed hybrid array of five drivers: two 30095 balanced armatures for highs, two 50060 balanced armatures for mids, and one 10mm double magnetic dynamic driver for lows.
How does the 111 dB sensitivity and 24 ohm impedance translate to real-world volume?
At 111 dB sensitivity and 24 ohms impedance, the earpieces reach loud listening levels easily from a phone or laptop 3.5mm jack without needing a separate amplifier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Case Logic
Case Logic 2.4A Dual USB Wall Charger with Micro-USB Cable - Black
$14.99
0.0001796BTC
In stock