Linksys
Linksys LGS352MPC 48-Port Gigabit PoE+ Switch 740W 4×10G SFP+ 2 in 1 Accessories
A 48-port Gigabit PoE+ switch with 740 W budget and four 10G SFP+ uplinks for high-capacity wired networks
- Connect up to 48 PoE+ devices with a single 740W power budget
- Uplink to core networks at 10G speed through four dedicated SFP+ slots
- Prioritise critical traffic with QoS and static routing for smoother performance
- Secure access using advanced MAC-based port controls on a managed platform
- Install on a desktop or wall using the included metal mounting hardware
48-Port Gigabit PoE+ Switch
The Linksys LGS352MPC is a managed network switch that provides 48 Gigabit Ethernet ports with Power over Ethernet Plus support and a 740 W power budget. It also includes four 10G SFP+ uplink slots for high-speed aggregation back to a core network. The metal chassis supports desktop or wall-mount installation.
Managed switching for IP camera
This switch suits installers who need to power and connect dozens of PoE devices such as surveillance cameras, wireless access points or door-access controllers from a single rack or desk unit. It is not intended for buyers who only need a few unmanaged ports or who require a higher-density 10G access layer than the four uplink slots provide.
740 W PoE+ power budget
The 740 W budget determines how many powered devices can run simultaneously at their maximum draw, making it the critical figure for sizing a camera or access-point installation. All other features depend on this capacity being sufficient for the planned device count.
Highlights
- Connect up to 48 PoE+ devices with a single 740W power budget
- Uplink to core networks at 10G speed through four dedicated SFP+ slots
- Prioritise critical traffic with QoS and static routing for smoother performance
- Secure access using advanced MAC-based port controls on a managed platform
- Install on a desktop or wall using the included metal mounting hardware
Specifications
No published specifications for this item yet.
Questions about this item
Will the 740 W PoE+ budget on this 48-port switch cover my existing cameras and access points?
The switch delivers up to 740 W of PoE+ power across its 48 Gigabit ports, so it can supply both data and power to compatible cameras, access points and door-access devices through a single cable each.
How can I confirm the four 10G SFP+ uplinks are passing traffic at full speed after installation?
Connect each uplink to a 10G-capable core switch or server, then check the port LEDs and the management interface for a 10 Gbps link status and incrementing packet counters on all four SFP+ slots.
Does the box include the SFP+ transceivers needed for the four 10G uplink slots, or must I buy them separately?
The package contains the switch unit, mounting hardware for desktop or wall installation and a power cord; SFP+ transceivers for the 10G uplink ports are not included and must be purchased separately.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
