Lincoln Electric
Lincoln Electric K530-3 Welding Gas Nozzle KP21-50-F
A conical copper gas nozzle with a 1/2 in bore for Magnum 100A and 100L MIG guns up to 100 A
- TypeTools
- Copper construction resists heat for consistent gas flow
- Conical bore focuses shielding gas on the weld pool
- Threaded connection fits Magnum 100A and 100L guns
- Recessed tip relationship protects the contact tip from spatter
- Medium-duty rating supports MIG welding up to 100 A
Compatible Magnum MIG Gas Nozzle
The Lincoln Electric K530-3 is a copper conical gas nozzle designed for MIG (GMAW) welding. It threads onto the Magnum 100A and 100L series guns and fits contact tip series Magnum 100A with gas diffuser KP35-50. The nozzle bore is 1/2 in and the tip relationship is recessed. It carries a medium duty rating at a maximum of 100 A.
MIG welders using Magnum 100 series guns
This nozzle suits operators running Lincoln Magnum 100A or 100L guns who need a standard 1/2 in conical bore for gas-shielded wire welding. It will not fit guns outside the Magnum 100 series or applications requiring a different bore diameter, tip relationship, or higher amperage rating. Buyers needing a flush or protruding tip position should look elsewhere.
1/2 in conical bore with recessed tip
The single specification that decides fit is the 1/2 in bore diameter combined with a recessed nozzle-to-tip relationship on a threaded copper body. If your Magnum 100 series gun calls for nozzle number KP21-50-F and diffuser KP35-50, this part matches. A different bore size or tip geometry means this nozzle will not work.
Highlights
- Copper construction resists heat for consistent gas flow
- Conical bore focuses shielding gas on the weld pool
- Threaded connection fits Magnum 100A and 100L guns
- Recessed tip relationship protects the contact tip from spatter
- Medium-duty rating supports MIG welding up to 100 A
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Type | Tools |
Questions about this item
What bore diameter and connection type does the KP21-50-F gas nozzle use?
The KP21-50-F nozzle has a 1/2 in bore diameter and a threaded connection for direct mounting onto the compatible gas diffuser.
How is the KP21-50-F nozzle installed, and what step is often missed?
Thread the nozzle onto the KP35-50 gas diffuser until fully seated; the step often missed is ensuring the contact tip sits at the correct recess relative to the nozzle bore.
Which consumable parts will need replacement alongside the KP21-50-F nozzle over time?
The Magnum 100A contact tip and KP35-50 gas diffuser are the companion consumables that wear and require periodic replacement during MIG welding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
