We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Lift-all

Lift-all 30007 Chain Sling 1/2 in G100 10 ft

SKU CH-PZGE-6GTDR

Adjustable alloy-steel chain sling rated 12,000 lb at 90 degrees and 20,800 lb at 60 degrees with a 1 25/32 in hook opening

  • TypeAngle, Pitch & Slope Locators
  • Adjustable chain sling fits varied rigging needs
  • Grade 100 alloy steel delivers 20,800 lb capacity at 60 degrees
  • Single-leg design rated 12,000 lb at 90 degrees
  • 1 25/32 in hook opening accepts large attachment points
  • New Lift-All 30007 model ready for immediate service

Purpose-built lifting

The Lift-all 30007 is a Grade 100 alloy-steel chain sling with a 1/2 in trade size and 10 ft length. It features Adjust-A-Link adjustability and a single sling hook with a 1 25/32 in opening. The unit is rated for 12,000 lb at 90 degrees and 20,800 lb at 60 degrees.

Riggers needing adjustable reach

This sling suits lifting crews who require on-site length adjustment on a single-leg assembly. It is not for operations that need multi-leg configurations beyond two legs or capacities exceeding the rated angles.

Decisive capacity check

The 60-degree rating of 20,800 lb is the primary figure for safe working load planning. Verify the intended lift angle against the 90-degree rating of 12,000 lb before specifying this sling.

Highlights

  • Adjustable chain sling fits varied rigging needs
  • Grade 100 alloy steel delivers 20,800 lb capacity at 60 degrees
  • Single-leg design rated 12,000 lb at 90 degrees
  • 1 25/32 in hook opening accepts large attachment points
  • New Lift-All 30007 model ready for immediate service

Specifications

BrandLiftall
TypeAngle, Pitch & Slope Locators

Questions about this item

How often should the Grade 100 alloy-steel chain and sling hook be inspected for wear or damage?

Inspect the chain and hook before every lift and perform a thorough documented inspection at least annually; replace any link or hook that shows stretch, cracks, nicks or deformation.

What is the maximum working load limit before the sling reaches its rated capacity?

The sling is rated for 12,000 lb at 90 degrees and 20,800 lb at 60 degrees; never exceed the limit for the actual angle of use.

Does the Adjust-A-Link mechanism generate noticeable heat or noise during continuous operation?

The sling has no moving parts that produce heat or noise; only the load and contact points warm slightly under sustained tension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.