We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron submersible sump pump with 1-1/2 inch discharge outlet

Liberty Pumps

Liberty Pumps HT41M-2 4/10 HP Submersible Sump Pump 115V

SKU CH-V40H-YGFBN

Submersible sump pump delivers 59.0 gpm at 5 ft head with a 4/10 hp motor on 115 V power

  • Moves 59.0 gpm at 5 ft head for rapid water removal
  • Cast iron body resists corrosion in wet sump pits
  • 4/10 HP motor draws 12 A at 115 V for efficient operation
  • 20 ft maximum head handles deep basement installations
  • 14 in minimum pit diameter fits standard sump basins

4/10 HP Submersible Sump Pump

The Liberty Pumps HT41M-2 is a 115V AC submersible sump pump rated at 4/10 horsepower. It features a cast iron body with an engineered polymer impeller and a carbon ceramic shaft seal. The unit operates at 60 Hz and draws 12 A during operation. No switch is included with this model.

Suited for standard residential sump pits

This pump suits installations with a minimum pit diameter of 14 in and a minimum water depth of 14 in. It delivers 59.0 gpm at 5 ft of head, 51 gpm at 10 ft and 31.0 gpm at 15 ft, with a maximum head of 20 ft. Buyers who need an integrated float switch or automatic operation should look at a different model.

Verify pit dimensions and electrical supply

Confirm your sump pit meets the 14 in diameter and depth requirements before ordering. Ensure a 115V AC, 60 Hz circuit capable of supplying 12 A is available at the installation point. The discharge outlet uses a 1-1/2 inch female connection; check that your piping matches this size. The overall height is 11 1/2 in.

Highlights

  • Moves 59.0 gpm at 5 ft head for rapid water removal
  • Cast iron body resists corrosion in wet sump pits
  • 4/10 HP motor draws 12 A at 115 V for efficient operation
  • 20 ft maximum head handles deep basement installations
  • 14 in minimum pit diameter fits standard sump basins

Specifications

BrandLIBERTY PUMPS

Questions about this item

What size sump pit diameter do I need to install this Liberty Pumps HT41M-2?

The pump requires a minimum sump pit diameter of 14 in to operate correctly.

Will my existing 1-1/2 inch discharge piping connect directly to this pump?

Yes, the pump outlet is 1-1/2 inch female NPT so it threads onto standard 1-1/2 inch discharge pipe.

How can I verify the pump is delivering its rated flow after installation?

Measure the discharge head; at 5 ft of head you should see about 59.0 gpm, at 10 ft about 51 gpm, and at 15 ft about 31.0 gpm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.