We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Lexmark fuser maintenance kit in sealed packaging

Lexmark

Lexmark MS81x MX71x MX81x Fuser Maintenance Kit 110-120V Type 05

SKU CH-E2B0-XKN6R

Genuine Lexmark maintenance kit replaces the fuser, transfer roller, pick roller and separation roller for MS81x, MX71x and MX81x printers on 110-120V power

  • Maintains print quality with complete fuser, transfer, pick and separation roller kit
  • Prevents printer stoppage at error 80.3 by replacing all wear parts on schedule
  • Matches installed fuser type using the two-digit type code for correct fit
  • Supports MS81x, MX71x and MX81x models with 110-120V power supply
  • Genuine Lexmark kit ensures reliable operation through scheduled maintenance intervals

Fuser Maintenance Kit for Lexmark MS81x MX71x MX81x

This genuine Lexmark maintenance kit supports the MS81x, MX71x and MX81x printer families. It contains the fuser, transfer roller, pick roller and separation roller required when the operator panel signals a replacement interval. The kit is rated for 110-120V operation and carries the Type 05 designation.

Service interval and end-of-life warnings

The printer displays message 80 when the maintenance interval arrives, prompting replacement of all four components to preserve print quality and reliability. Progressive warnings appear as error codes 80.0, 80.1 and 80.2 while the fuser nears its rated life. At code 80.3 the fuser has reached its limit and the printer stops until the kit is installed.

Type-specific compatibility and daily implication

You must verify the two-digit type code on the installed fuser or read the device information page before ordering, because only the matching Type 05 kit will fit. Installing the correct kit restores normal operation and clears the maintenance alerts without requiring a technician visit. Buyers whose printers use a different fuser type cannot use this kit.

Highlights

  • Maintains print quality with complete fuser, transfer, pick and separation roller kit
  • Prevents printer stoppage at error 80.3 by replacing all wear parts on schedule
  • Matches installed fuser type using the two-digit type code for correct fit
  • Supports MS81x, MX71x and MX81x models with 110-120V power supply
  • Genuine Lexmark kit ensures reliable operation through scheduled maintenance intervals

Specifications

No published specifications for this item yet.

Questions about this item

Will the 110-120V fuser kit fit the existing fuser in my Lexmark MS81x printer?

Verify the two-digit type code on the installed fuser; this kit is Type 05 and must match that code exactly.

How do I confirm the kit has reset the maintenance counter after installation?

The operator panel will clear the 80 "Replace maintenance kit" message and stop showing error codes 80.0x, 80.1x, 80.2x or 80.3x.

Does the box contain the transfer roller, pick roller and separation roller, or must I order them separately?

The maintenance kit includes the fuser, transfer roller, pick roller and separation roller; no additional rollers are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.