We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Lexmark 26Z0081 staple punch finisher unit, rectangular metal housing, neutral grey finish

Lexmark

Lexmark 26Z0081 Staple Punch Finisher (3-Hole)

SKU CH-MST9-1M2DG

Adds stapling and three-hole punching to compatible Lexmark printers with 50-sheet staple capacity and 3,200-sheet lower bin

  • Product TypeOther Accessories
  • Staples up to 50 sheets per set with 5,000 staple capacity
  • Punches 3 holes on upper bin for up to 200 sheets
  • Offsets and stacks up to 3,200 sheets in lower bin
  • Handles 16 to 68 lb media across A3, A4, Letter, Legal, Ledger and more
  • Requires 2,500-sheet tandem tray or dual 500-sheet trays for correct printer height

Lexmark 26Z0081 Staple Punch Finisher

The Lexmark 26Z0081 Staple Punch Finisher adds professional finishing to compatible Lexmark MS911 and MX91x series printers and MFPs. It provides three-hole punching, multi-position stapling and offset stacking for offices that produce bound reports or punched handouts. The unit attaches to supported devices to extend output handling beyond the standard bin.

Output capacity and media support

Bin 1 holds up to 200 sheets with hole punching and includes a full sensor. Bin 2 supports up to 3200 sheets with stapling, punching and offset stacking, though capacity reduces when stapling is used; it also has a full sensor. Both bins accept plain, recycled, bond and glossy media from 16 to 68 lb (60 to 256 gsm) in sizes including A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger.

Requirements and upgrade context

The finisher requires a 2500-Sheet Tandem Tray or dual 500-Sheet Trays to raise the printer to the correct operating height, and the standard output bin capacity drops to 100 sheets when the floor-standing finisher is installed. It suits sites moving from basic output trays to high-volume finishing, but it does not serve environments needing finishing on non-Lexmark hardware or on Lexmark models outside the listed MX910de, MX912dxe, MX911dte and MS911de.

Highlights

  • Staples up to 50 sheets per set with 5,000 staple capacity
  • Punches 3 holes on upper bin for up to 200 sheets
  • Offsets and stacks up to 3,200 sheets in lower bin
  • Handles 16 to 68 lb media across A3, A4, Letter, Legal, Ledger and more
  • Requires 2,500-sheet tandem tray or dual 500-sheet trays for correct printer height

Specifications

Product TypeOther Accessories

Questions about this item

How do I install the Lexmark 26Z0081 finisher and what height adjustment is required?

The finisher requires a 2500-Sheet Tandem Tray or two 500-Sheet Trays to raise the printer or MFP to the correct height for use.

What consumable replacement will the staple punch finisher need during its life?

The finisher uses staple cartridges with a 5,000-staple capacity; each stapled set supports up to 50 sheets for 4-position stapling.

Which capacity limit is reached first when running large stapled jobs continuously?

The lower bin 2 holds up to 3,200 sheets, but its capacity is reduced when stapling is used, so the bin-full sensor will trigger before the staple supply runs out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.