Lenovo
Lenovo 7XB7A00069 2.4 TB 2.5" SAS 12Gb/s 10000 RPM internal hard drive
A 2.4 TB 2.5" SAS 12Gb/s drive spinning at 10000 RPM for high-speed server storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity2TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 4 TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense drive bays
- Hot-swappable design allows drive replacement without downtime
Enterprise Storage Drive
The Lenovo 7XB7A00069 is a 2.4 TB internal hard drive built for servers and workstations that need fast, reliable spinning storage. Its SAS 12Gb/s interface and 10000 RPM spindle suit transactional databases, virtualization hosts and high-throughput logging workloads.
Bare Drive Delivery
The drive ships as a bare unit without cables, brackets or management software, so integrators must supply a compatible SAS backplane or HBA and any mounting hardware the chassis requires. Hot-swap capability depends entirely on the enclosure and controller used.
Standard 2.5 SAS Fit
Installation follows the familiar 2.5 inch SAS form factor: slide the drive into a hot-swap bay or caddy and secure it with the server’s latch mechanism. The most common issue is a controller or backplane that does not negotiate the 12Gb/s link, leaving the drive running at a lower speed.
Highlights
- 4 TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense drive bays
- Hot-swappable design allows drive replacement without downtime
Specifications
| Brand | Lenovo |
|---|---|
| Model | 7XB7A00069 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 2TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
| Shipping weight | 0.40 kg |
| Package size | 178 × 127 × 76 mm |
Questions about this item
Will the 2.5 inch SAS 12Gb/s drive need a firmware update or bearing service after a period of continuous operation?
The drive is supplied as a bare unit with no user-serviceable parts; firmware updates are handled by the server or array controller if required.
What is the first limit reached when the 10000 RPM drive runs sustained workloads?
The SAS 12Gb/s interface and 10000 RPM spindle set the sustained throughput ceiling; the controller will throttle before the drive overheats.
How much noise and heat does the 2.4 TB SAS drive produce when it runs all day in a hot-swap bay?
At 10000 RPM the drive emits typical enterprise-level acoustic output and warmth; adequate chassis airflow keeps temperatures within normal operating range.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
