Legris
Legris 7040 06 10 Flow Control Valve 6mm 1/8 BSPP 145 psi
Regulates pneumatic flow in one direction with a 6 mm push-to-connect inlet, 1/8 BSPP outlet, 14.5–145 psi range and 158 °F maximum temperature
- Precise flow adjustment with 360-degree rotation
- Secure 6mm push-to-connect inlet fitting
- Reliable 1/8 BSPP threaded outlet connection
- Consistent performance up to 145 psi max pressure
- Stable operation from 14.5 to 158 degrees F
Legris 7040 06 10 Flow Control Valve
This Legris flow control valve regulates pneumatic airflow in a single direction using a screwdriver adjustment. It accepts a 6 mm push-to-connect tube at the inlet and threads into a 1/8 in BSPP port at the outlet. The unit operates between 14.5 and 145 psi and withstands temperatures up to 158 °F. It suits installers who need precise, manual speed control on compressed-air circuits.
Screwdriver adjustment and 360° rotation
The integrated screwdriver slot lets technicians set flow rates without specialised tools, while 360 degrees of body rotation simplifies tube routing in tight cabinets. One-way control prevents unwanted reverse flow, protecting downstream actuators from pressure spikes. These features reduce commissioning time and keep tubing layouts clean in automated machinery.
Brass construction with push-to-connect and BSPP
The brass body resists corrosion from lubricated air and typical industrial environments. A 6 mm push-to-connect inlet grips tubing securely without clamps, and the 1/8 in BSPP male outlet seals with a standard bonded washer. The compact form factor fits narrow manifold spacing, though installers needing higher pressure ratings or larger port sizes should select a different model.
Highlights
- Precise flow adjustment with 360-degree rotation
- Secure 6mm push-to-connect inlet fitting
- Reliable 1/8 BSPP threaded outlet connection
- Consistent performance up to 145 psi max pressure
- Stable operation from 14.5 to 158 degrees F
Specifications
| Brand | LEGRIS |
|---|
Questions about this item
Will the 6 mm push-to-connect inlet need new tubing or seals after long service?
The 6 mm push-to-connect inlet uses a collet and O-ring seal; replace the tubing if it shows cracks or the O-ring if air leaks appear at the connection.
Does the 145 psi pressure rating limit how long the valve can stay at full flow?
The valve is rated for continuous operation up to 145 psi; staying within the 14.5–145 psi range prevents premature seat wear.
How much heat does the valve generate when it runs all day at 145 psi?
The body is rated to 158 °F ambient; the valve itself adds negligible heat, so panel temperature stays close to the surrounding air.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
