We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree male elbow push-fit fitting with 10 mm tube and 1/4 in thread

Legris

Legris 3699 10 13 90° Male Elbow 10 mm Tube 1/4 in Thread

SKU CH-QM2C-J5EW0 MPN 3699

Nickel-plated brass 90° male elbow connects 10 mm push-fit tube to 1/4 in BSPP thread, rated 435 psi at 302 °F

  • TypeDrain Components
  • Push-to-connect design speeds installation on 10 mm tubing
  • Male BSPP 1/4 in thread secures directly into ports
  • Nickel-plated brass body resists corrosion in fluid systems
  • Rated to 435 psi and 302 °F for demanding lines
  • Compact 27 mm length fits tight routing spaces

90° Push-Fit Brass Elbow

This nickel-plated brass elbow joins a 10 mm push-to-connect tube to a 1/4 in MBSPP male thread. The 90-degree bend redirects flow in tight plumbing layouts. Rated for 435 psi at up to 302 °F. Overall length is 27 mm.

Suits metric tube to BSPP ports.

Installers connecting 10 mm OD tubing to a 1/4 in parallel male thread will find this a direct fit. It does not accept imperial-sized tube or female-threaded ports. Systems requiring a straight connector or a different thread standard need another fitting.

10 mm push-to-connect to 1/4 in MBSPP

The defining specification is the combination of a 10 mm push-to-connect end and a 1/4 in MBSPP male thread. Verify both the tube outer diameter and the port thread before ordering.

Highlights

  • Push-to-connect design speeds installation on 10 mm tubing
  • Male BSPP 1/4 in thread secures directly into ports
  • Nickel-plated brass body resists corrosion in fluid systems
  • Rated to 435 psi and 302 °F for demanding lines
  • Compact 27 mm length fits tight routing spaces

Specifications

TypeDrain Components
BrandLegris
Model3699 10 13

Questions about this item

What tube outer diameter and thread size does the 90-degree elbow accept?

The fitting takes a 10 mm tube on the push-to-connect side and a 1/4 in MBSPP thread on the male side.

How do you install the push-to-connect end, and what is the common mistake?

Push the 10 mm tube straight in until it seats; the frequent error is not inserting it fully, which leaves the grip ring unengaged.

What ongoing checks does the brass elbow need after installation?

Inspect the joint periodically for leaks and retighten the 1/4 in thread if vibration loosens it; the brass body and seals require no lubrication.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.