We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass drain trap with 14mm tube and BSPT male connector, 22mm hex

Legris

Legris 3675 14 17 Drain Trap 14mm Tube x BSPT Nickel Brass

SKU CH-YGHJ-FSF01 MPN 3675

Nickel-plated brass drain connector joins 14 mm tube to 3/8 in BSPT thread, rated to 435 psi from −4 °F to 302 °F

  • TypeDrain Components
  • Nickel-plated brass resists corrosion
  • 435 psi maximum pressure rating
  • Operates from -4 to 302 degrees F
  • 22 mm hex allows standard tool use
  • Connects 14 mm tube to 3/8 in BSPT

14 mm tube drain connector

This Legris 3675 fitting joins a 14 mm tube to a male BSPT thread in plumbing and fluid-transfer systems. The body is nickel-plated brass for corrosion resistance. It is rated for pressures up to 435 psi and temperatures from -4 to 302 degrees Fahrenheit.

Installers needing a straight tube-to-thread joint

The connector suits technicians who require a reliable seal on 14 mm tubing with a 3/8 inch pipe thread. It does not serve applications that need an elbow, a tee or a different thread standard such as NPT or metric.

435 psi pressure rating

This maximum working pressure determines whether the fitting matches the system design. Exceeding the limit risks leaks or failure. Always verify the operating pressure before installation.

Highlights

  • Nickel-plated brass resists corrosion
  • 435 psi maximum pressure rating
  • Operates from -4 to 302 degrees F
  • 22 mm hex allows standard tool use
  • Connects 14 mm tube to 3/8 in BSPT

Specifications

TypeDrain Components
BrandLegris
Model3675 14 17

Questions about this item

What tube size and thread type does the Legris 3675 14 17 connector accept?

It fits a 14 mm tube on one side and a male BSPT thread on the other, with a 22 mm hex for tightening.

How do you install the fitting without damaging the nickel-plated brass body?

Thread the BSPT end into the port by hand, then use a 22 mm spanner on the hex to snug it — do not overtighten, or the sealing face can distort.

When should the drain trap be replaced given its pressure and temperature ratings?

Replace it if you see corrosion, cracking, or leakage after prolonged exposure near the 435 psi limit or the 302 °F upper temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.