We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass male connector with 22 mm hex

Legris

Legris 3675 10 21 13/32in Tube 1/2in BSPT Male Connector Trap

SKU CH-RQ05-PHND8 MPN 3675

Connects 13/32 in tube to 1/2 in BSPT male thread with nickel-plated brass rated to 435 psi from -4 to 302 °F

  • TypeDrain Components
  • Nickel-plated brass resists corrosion in harsh environments
  • 13/32 inch tube fits 10 mm lines without adapters
  • 1/2 inch BSPT male thread seals directly into standard ports
  • Rated to 435 psi for high-pressure fluid systems
  • Operates from -4 °F to 302 °F across extreme temperatures

Nickel-plated brass male connector

The Legris 3675 10 21 fitting joins a 13/32 in tube to a 1/2 in BSPT port. Nickel-plated brass construction handles pressures up to 435 psi across a -4 to 302 degrees F range. A 22 mm hex allows standard tool engagement for installation. This component suits pneumatic or hydraulic circuits requiring a straight male thread connection.

Installers needing a straight tube-to-port joint

The barbed tube end and tapered BSPT thread create a seal without a separate compression nut. Teams wanting push-to-connect speed or an integrated swivel should look at other fitting styles. The fixed orientation also limits use where vibration demands a flexible hose assembly. California Proposition 65 warnings apply to the material content.

13/32 in tube size matches your line

The fitting accepts only the stated 13/32 in outside-diameter tube; other diameters will not seal correctly. Verify the mating port is a 1/2 in BSPT female thread before ordering. Pressure rating and temperature range are bound to this specific geometry and material.

Highlights

  • Nickel-plated brass resists corrosion in harsh environments
  • 13/32 inch tube fits 10 mm lines without adapters
  • 1/2 inch BSPT male thread seals directly into standard ports
  • Rated to 435 psi for high-pressure fluid systems
  • Operates from -4 °F to 302 °F across extreme temperatures

Specifications

TypeDrain Components
BrandLegris
Model3675 10 21

Questions about this item

Will the nickel-plated brass fitting handle continuous 435 psi pressure without leaking or overheating?

The connector is rated for a maximum pressure of 435 psi and an operating temperature range of -4 °F to 302 °F, so it is designed for sustained use within those limits.

My tubing is 13/32 in — does this connector match that exact tube size and the 1/2 in BSPT thread I need?

Yes, the fitting is built for a 13/32 in tube outer diameter and a 1/2 in BSPT male thread, so it will join directly to tubing and ports of those dimensions.

Can I reuse my existing 22 mm wrench on the hex of this connector when I install it alongside older brass fittings?

The connector has a 22 mm hex, so the same wrench you use on other 22 mm fittings will work for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.