We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree swivel elbow fitting with push-to-connect and male threads

Legris

Legris 3609 62 18 90° Swivel Male Elbow 1/2 in Tube

SKU CH-1S14-NHGV2 MPN 3609

Nickel-plated brass push-fit elbow connects 1/2 in tube to 3/8 in MNPT, rated 435 psi and 302 °F

  • TypeDrain Components
  • Swivel design simplifies tube routing in tight spaces
  • Push-to-connect fitting enables tool-free installation on 1/2 in tubing
  • Brass construction resists corrosion for long service life
  • 435 psi rating handles demanding pneumatic and hydraulic lines
  • 302 Degrees F limit suits high-temperature fluid systems

Push-Fit Brass Elbow for Lubrication Lines

This Legris 3609 62 18 elbow connects 1/2 in tube to a 3/8 in male NPT thread. The nickel-plated brass body handles 435 psi at up to 302 Degrees F. A 90 Degree swivel design allows quick orientation in tight routing. Pre-applied thread sealant is not included.

Suits Push-Connect Assemblies — Not

Installers who need a push-to-connect joint on the tube side and a standard pipe thread on the port side will find this fitting matches both requirements. Teams committed to compression ferrules, flare nuts or solvent-weld systems cannot use the push-fit end. The fixed 3/8 in MNPT port also rules out applications requiring a different thread size or a female port.

1/2 in Tube OD to 3/8 in MNPT Connection Profile

The critical specification is the mixed interface: Side A accepts 1/2 in outer-diameter tube with a push-fit seal, while Side B provides a 3/8 in male NPT thread. Matching both dimensions exactly decides whether the elbow fits the existing tubing and port.

Highlights

  • Swivel design simplifies tube routing in tight spaces
  • Push-to-connect fitting enables tool-free installation on 1/2 in tubing
  • Brass construction resists corrosion for long service life
  • 435 psi rating handles demanding pneumatic and hydraulic lines
  • 302 Degrees F limit suits high-temperature fluid systems

Specifications

TypeDrain Components
BrandLegris
Model3609 62 18

Questions about this item

How do I install the 3609 62 18 elbow and what step is often missed?

Push the 1/2 in tube firmly into the push-to-connect side until it seats, then thread the 3/8 in MNPT end into the port; the step often missed is not pushing the tube past the first grip ring to the tube stop.

What maintenance or replacement will the 3609 62 18 need later?

Inspect the brass body and thread sealant for leaks or corrosion during routine system checks; replace the fitting if the swivel action stiffens, the tube grip fails, or the 3/8 in threads show damage.

What limit appears first on the 3609 62 18 under sustained use?

The 435 psi maximum operating pressure or 302 Degrees F temperature limit will be reached first depending on system conditions; exceeding either can cause seal failure or fitting deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.