We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass swivel elbow fitting with hex body

Legris

Legris 3609 60 18 Swivel Elbow 3/8" Tube x MNPT Nickel Brass

SKU CH-F9HA-AZDVE MPN 3609

Nickel-plated brass swivel elbow connects 3/8 inch tube to MNPT thread, rated to 435 psi and 302 degrees Fahrenheit

  • TypeDrain Components
  • MaterialHAWA
  • Swivel action simplifies tube alignment during installation
  • Nickel-plated brass body resists corrosion in fluid systems
  • FKM gasket maintains seal from -4 to 302 degrees F
  • Rated for 435 psi maximum working pressure
  • 18 mm hex allows secure tightening with standard tools

Swivel Elbow for 3/8" Tube and MNPT

This Legris swivel elbow connects 3/8 inch tube to a male NPT thread using nickel-plated brass construction. The swivel design allows rotational alignment during installation without stressing the tubing. It is intended for fluid-handling systems that require a reliable joint between tube and pipe threads.

Suits installers needing a corrosion-resistant

The fitting serves technicians who need a compact elbow with 360-degree orientation for tube-to-pipe connections. It is not for applications that exceed 435 psi or temperatures above 302 degrees F. Builders requiring a different thread standard or tube diameter should select an alternative fitting.

Maximum pressure rating of 435 psi

The 435 psi limit determines whether this elbow can handle the system pressure safely. FKM gasket material supports the stated temperature range from minus 4 to 302 degrees F. Verify the pressure requirement before specifying this component.

Highlights

  • Swivel action simplifies tube alignment during installation
  • Nickel-plated brass body resists corrosion in fluid systems
  • FKM gasket maintains seal from -4 to 302 degrees F
  • Rated for 435 psi maximum working pressure
  • 18 mm hex allows secure tightening with standard tools

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3609 60 18

Questions about this item

Will the nickel-plated brass fitting handle continuous 435 psi pressure without leaking or overheating?

The fitting is rated for 435 psi maximum pressure and a temperature range of -4 to 302 °F, so it is designed for sustained operation within those limits.

What thread sealant or gasket do I need to install this 3/8" MNPT swivel elbow?

The fitting includes an FKM gasket for the tube end; the 3/8" MNPT threads require standard pipe thread sealant or tape supplied by the installer.

Can I connect this 18 mm hex swivel elbow to my existing 3/8" tubing and NPT ports without adapters?

Yes, it accepts 3/8" tube on one side and 3/8" MNPT on the other, matching both sizes directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.