We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree push-fit elbow fitting, 12mm tube, 1/4 inch BSPT thread, 31mm length

Legris

Legris 3609 12 13 Nickel Plated Brass Male Swivel Elbow 90 Degrees 12mm Tube Trap

SKU CH-27QD-0YM5X MPN 3609

Nickel-plated brass 90-degree male swivel elbow connects 12 mm tube to 1/4 in BSPT thread, rated 435 psi at 302 °F

  • TypeDrain Components
  • Swivel action eases routing in tight spaces
  • Push-fit connection installs without tools
  • Nickel-plated brass resists corrosion
  • 435 psi rating handles high-pressure systems
  • 302 °F limit suits hot-fluid applications

Push-Fit Brass Elbow Fitting

This nickel-plated brass elbow provides a 90-degree push-to-connect joint for 12 mm tubing on one side and a 1/4 inch male BSPT thread on the other. It is built for fluid or pneumatic lines that need a compact, swivelling connection in tight spaces.

For Lubrication Lines Only

Suits installers who need a quick-connect elbow rated to 435 psi and 302 °F for lubrication circuits. Not intended for potable water, gas distribution, or any system that demands certified drinking-water or fuel-line approvals.

12 mm Tube to 1/4 Inch BSPT

The critical specification is the combination of a 12 mm push-fit port and a 1/4 inch male BSPT thread; both dimensions must match the existing tubing and port exactly or the fitting will not seal.

Highlights

  • Swivel action eases routing in tight spaces
  • Push-fit connection installs without tools
  • Nickel-plated brass resists corrosion
  • 435 psi rating handles high-pressure systems
  • 302 °F limit suits hot-fluid applications

Specifications

TypeDrain Components
BrandLegris
Model3609 12 13

Questions about this item

How can I confirm the 90-degree elbow is seated correctly on the 12 mm tube after installation?

Push the tube firmly until it stops; the grip ring will hold it. Pressurise the line up to 435 psi and check for leaks at the connection.

What comes with the fitting and what must I supply separately?

The nickel-plated brass elbow with 1/4 in MBSPT thread and push-to-connect end for 12 mm tube is supplied. Thread sealant and tubing are not included.

Which model should I choose for a 12 mm tube and 1/4 in BSPT port?

Select model 3609 12 13; it matches a 12 mm tube OD and a 1/4 in MBSPT thread.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.