We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass swivel elbow fitting 10mm tube 1/4 BSPT

Legris

Legris 3609 10 13 Brass Swivel Elbow 10mm Tube 1/4 BSPT

SKU CH-NR76-8N61H MPN 3609

A push-fit brass swivel elbow connects 10 mm tubing to a 1/4 BSPT male thread, rated to 435 psi and 302 °F

  • TypeDrain Components
  • MaterialHAWA
  • Nickel-plated brass resists corrosion in harsh environments
  • Push-to-connect design speeds installation without special tools
  • Swivel male elbow allows flexible routing in tight spaces
  • Rated to 435 psi and 302 °F for demanding lubrication lines
  • Compact 29 mm length fits confined plumbing assemblies

Swivel elbow for 10 mm tube

This push-fit elbow connects a 10 mm tube to a 1/4 BSPT male thread. The brass body suits lubrication circuits and general plumbing. It is intended for installers who need a compact right-angle joint that swivels for alignment.

Rated for 435 psi and 302 °F

The fitting holds 435 psi continuously at up to 302 °F. Brass construction resists deformation under sustained pressure and temperature. The swivel action does not weaken the seal during prolonged service.

Brass body with pre-applied sealant

Nickel-plated brass dissipates heat from the fluid without external cooling. No moving parts generate noise. Overall length is 29 mm, keeping the assembly short and the pressure drop low.

Highlights

  • Nickel-plated brass resists corrosion in harsh environments
  • Push-to-connect design speeds installation without special tools
  • Swivel male elbow allows flexible routing in tight spaces
  • Rated to 435 psi and 302 °F for demanding lubrication lines
  • Compact 29 mm length fits confined plumbing assemblies

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3609 10 13

Questions about this item

Will the 302 °F temperature limit hold up if this fitting runs continuously on a lubrication line?

The brass body is rated to 302 °F maximum operating temperature, so it will handle continuous lubrication service within that limit.

What tubing and thread must already be on the machine for this push-fit elbow to connect?

You need 10 mm outer-diameter tubing for the push-to-connect side and a 1/4 in BSPT female port for the male-threaded side.

Can this 1/4 BSPT swivel elbow mate with an existing 1/4 NPT port on older equipment?

No — BSPT and NPT threads are not interchangeable, so a 1/4 BSPT male will not seal in a 1/4 NPT female port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.