We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass swivel elbow fitting 8mm tube BSPT thread hex 14mm

Legris

Legris 3609 08 13 8mm Tube x BSPT Nickel Brass Swivel Male Elbow Trap

SKU CH-MS4N-1PD45 MPN 3609

Connects 8 mm tube to 1/4 in BSPT with a nickel-plated brass swivel elbow rated to 435 psi and 302 °F

  • TypeDrain Components
  • MaterialHAWA
  • Swivel elbow simplifies routing in tight spaces
  • Nickel-plated brass body resists corrosion and wear
  • FKM gasket seals reliably from -4 °F to 302 °F
  • Rated to 435 psi for demanding pneumatic systems
  • 8 mm tube to 1/4 in BSPT with 14 mm hex

Nickel-plated brass swivel elbow

The Legris 3609 fitting joins an 8 mm tube to a 1/4 in BSPT thread in a compact 90-degree elbow. Nickel-plated brass construction resists corrosion while the swivel nut allows final orientation without twisting the tube. An FKM gasket seals the joint across a wide temperature span. The fitting is rated for 435 psi maximum pressure.

Pneumatic and fluid systems needing a rotatable

Installers who require a fixed elbow without swivel action should choose a non-swivel alternative. Systems operating above 435 psi or beyond the -4 to 302 °F range need higher-rated components. Applications that demand stainless steel or plastic bodies are not served by this brass part.

8 mm tube to 1/4 in BSPT connection with 14 mm hex

This single specification determines whether the fitting matches the tube and port in your circuit. Verify both the 8 mm tube OD and the 1/4 in BSPT thread before ordering. The 14 mm hex size confirms the wrench required for assembly.

Highlights

  • Swivel elbow simplifies routing in tight spaces
  • Nickel-plated brass body resists corrosion and wear
  • FKM gasket seals reliably from -4 °F to 302 °F
  • Rated to 435 psi for demanding pneumatic systems
  • 8 mm tube to 1/4 in BSPT with 14 mm hex

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3609 08 13

Questions about this item

Will the 8 mm tube connection on the 3609 swivel elbow mate with my existing 8 mm push-fit lines without leaks?

Yes — the fitting is designed for 8 mm tube and uses an FKM gasket to seal at up to 435 psi across a -4 °F to 302 °F range.

How can I verify the 3609 swivel elbow is seated correctly after installation?

Tighten the BSPT thread with a 14 mm hex until the swivel body locks, then pressurise the line to working pressure and check for leaks at the FKM seal.

Does the 3609 08 13 elbow include the FKM gasket and any sealing tape, or must I buy them separately?

The FKM gasket is built into the nickel-plated brass body; thread sealant or tape for the 1/4 in BSPT male end is not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.