We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting, silver finish, 6mm tube to 1/8 BSPT thread

Legris

Legris 3609 06 10 Push-Fit Elbow Fitting 6mm Tube 1/8 BSPT Brass

SKU CH-HHV9-YM98V MPN 3609

Push-fit elbow connects 6 mm tube to 1/8 BSPT thread, rated to 435 psi and 302 °F

  • TypeDrain Components
  • MaterialHAWA
  • Push-to-connect design enables quick installation
  • Brass construction resists corrosion in lubrication systems
  • 1/8 BSPT male thread seals with 6 mm tube
  • Rated to 435 psi at 302 °F operating limits
  • Compact 21 mm length fits tight plumbing spaces

Brass push-fit elbow for 6 mm tube

This push-fit elbow connects a 6 mm outer-diameter tube to a 1/8 in BSPT male thread. The brass body is rated for 435 psi and 302 °F, and the overall length is 21 1/2 mm. No thread sealant is pre-applied on the supplied fitting. The fitting is new and ready for installation in fluid-handling systems.

Suited for 6 mm tube to 1/8 BSPT joints

Installers needing a compact 90-degree connection between metric tubing and a 1/8 in tapered pipe thread will find this elbow appropriate. It is not intended for larger tube diameters, different thread forms, or applications that exceed the stated pressure and temperature limits. Buyers who need a straight connector, a different thread size, or a fitting with factory-applied sealant should look at other parts.

6 mm push-to-connect to 1/8 BSPT male

The critical specification is the combination of a 6 mm push-to-connect port and a 1/8 in BSPT male thread on a single brass elbow. Verifying both the tube outer diameter and the thread standard against the system design confirms whether this fitting matches the required joint.

Highlights

  • Push-to-connect design enables quick installation
  • Brass construction resists corrosion in lubrication systems
  • 1/8 BSPT male thread seals with 6 mm tube
  • Rated to 435 psi at 302 °F operating limits
  • Compact 21 mm length fits tight plumbing spaces

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3609 06 10

Questions about this item

How can I confirm the push-fit elbow is sealing correctly after installation?

Pressurise the line up to the 435 psi maximum and check for leaks at the 6 mm push-to-connect and 1/8 BSPT threads; the joint should hold without weeping at temperatures up to 302 °F.

What comes in the box and is thread sealant already applied?

The box contains the brass 3609 06 10 elbow fitting only; the specifications state pre-applied thread sealant is not included, so you must supply your own sealant or tape for the 1/8 BSPT thread.

Which version of the 3609 elbow should I choose for a 6 mm tube and 1/8 BSPT port?

Select the 3609 06 10 model — it matches a 6 mm tube outer diameter on the push-fit side and a 1/8 in BSPT male thread on the other, with an overall length of 21 1/2 mm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.