We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass male connector with 10mm tube and BSPP thread

Legris

Legris 3601 10 21 10mm Tube x BSPP Nickel Brass Male Trap

SKU CH-435B-2ZHV1 MPN 3601

Nickel-plated brass male connector joins 10 mm tube to 1/2 in BSPP thread, rated to 435 psi from -4 °F to 302 °F with a 24 mm hex

  • TypeDrain Components
  • Nickel-plated brass resists corrosion in fluid systems
  • 10 mm tube fits 13/32 in pipe for secure connections
  • BSPP male thread seals at 1/2 in pipe size
  • 435 psi rating handles high-pressure applications
  • 24 mm hex allows standard tool tightening

Brass Male Connector for 10 mm Tube

The Legris 3601 10 21 connects a 10 mm tube to a 1/2 in BSPP thread using a nickel-plated brass body. It is rated for pressures up to 435 psi and operates between -4 °F and 302 °F. The fitting uses a 24 mm hex for installation.

Suits Pneumatic and Fluid Lines

This connector suits installers joining metric tubing to BSPP ports in compressed-air, water or oil circuits where the pressure and temperature ratings match the application. It does not suit systems requiring push-to-connect ends, larger tube diameters or threads other than 1/2 in BSPP.

Tube Size 10 mm and 1/2 in BSPP Thread

The single specification that decides fit is the combination of a 10 mm tube end and a 1/2 in BSPP male thread. If the tubing or port differs from these dimensions, the connector will not seal.

Highlights

  • Nickel-plated brass resists corrosion in fluid systems
  • 10 mm tube fits 13/32 in pipe for secure connections
  • BSPP male thread seals at 1/2 in pipe size
  • 435 psi rating handles high-pressure applications
  • 24 mm hex allows standard tool tightening

Specifications

TypeDrain Components
BrandLegris
Model3601 10 21

Questions about this item

At what pressure will the 10mm tube connection reach its limit during continuous operation?

The fitting is rated for a maximum of 435 psi, so sustained use above that pressure exceeds its design limit.

How much heat can the nickel-plated brass body handle when the system runs all day?

The material is rated from -4 to 302 degrees Fahrenheit, covering continuous high-temperature operation.

Which thread size must the mating port have for the BSPP male end to seal properly?

The male connector uses a 1/2 inch BSPP thread, so the receiving port must match that size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.