We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit male elbow fitting 10mm OD 1/4in BSPP 290 PSI

Legris

Legris 3199 10 13 Male Elbow Trap 10mm OD 290 PSI

SKU CH-R70Z-0CN0N MPN 3199

A 10 mm push-fit elbow trap rated to 290 psi with 1/4 inch MBSPP thread, supplied new in black fiberglass-reinforced nylon for vacuum applications up to 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect elbow enables quick 10 mm tube installation
  • Male BSPP thread connects directly to 1/4 in port
  • Fiberglass-reinforced nylon body withstands 290 psi pressure
  • Rated for 175 °F maximum operating temperature
  • Pre-applied sealant not included — apply separately for leak-free joints

Push-to-Connect Elbow Fitting

The Legris 3199 10 13 is a push-fit elbow designed to join a 10 mm outer diameter tube to a 1/4 inch MBSPP male thread. Its fiberglass-reinforced nylon body handles vacuum applications and a maximum operating pressure of 290 psi. The fitting operates at temperatures up to 175 degrees Fahrenheit. It comes in a black finish and is sold as a pack of ten pieces.

Suitable for pneumatic and vacuum lines

This fitting suits installers who need a compact 90-degree connection between metric tubing and a standard BSPP port. The push-to-connect end requires no tools for tube insertion. Buyers needing a straight connector, a different thread standard, or a metal body should look at other options. The pre-applied thread sealant is not included with this model.

10 mm tube to 1/4 inch MBSPP thread

The critical specification is the combination of a 10 mm push-to-connect port on one side and a 1/4 inch MBSPP male thread on the other. This exact interface match determines whether the part fits the existing tubing and port. Verify both dimensions against your system before ordering.

Highlights

  • Push-to-connect elbow enables quick 10 mm tube installation
  • Male BSPP thread connects directly to 1/4 in port
  • Fiberglass-reinforced nylon body withstands 290 psi pressure
  • Rated for 175 °F maximum operating temperature
  • Pre-applied sealant not included — apply separately for leak-free joints

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3199 10 13

Questions about this item

What does the 290 psi rating on the Legris 3199 10 13 actually limit?

The 290 psi figure is the maximum operating pressure; the fitting must not be used in systems that exceed this pressure at any temperature up to 175 Degrees F.

What clearance does the 10 mm push-to-connect end and 1/4 in MBSPP thread need to fit?

The elbow body is black fiberglass-reinforced nylon; allow space for the 10 mm tube to push fully into side A and for a 1/4 in MBSPP male thread to engage side B with a sealing washer.

How is the Legris 3199 10 13 installed, and what step is often missed?

Push the 10 mm tube into side A until it locks, then thread the 1/4 in MBSPP end into the port and tighten; the common miss is forgetting the required sealing washer on the MBSPP thread because no sealant is pre-applied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.