We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass push-fit adapters with black finish and BSPT threads

Legris

Legris 3175 14 17 Push-Fit Adapter 14mm Tube 3/8in BSPT PK10

SKU CH-KC5A-78CMB MPN 3175

Pack of ten push-fit brass adapters joining 14 mm tube to 3/8 in BSPT thread, rated to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation on 14 mm tube
  • Male 3/8 in BSPT thread seals directly into port
  • Pre-applied thread sealant cuts assembly time
  • Brass C36000 body handles 290 psi at 175 °F
  • Pack of ten fittings covers multiple connection points

Push-Fit Adapter for 14 mm Tube

The Legris 3175 14 17 is a push-fit adapter designed to join a 14 mm tube to a 3/8 inch BSPT male thread. It uses a brass body rated for 290 psi and 175 degrees F, and comes in a pack of 10 pieces for plumbing and vacuum systems.

Suits installers using 14 mm tubing

This fitting suits installers who need a quick, tool-free connection between 14 mm tube and a 3/8 inch BSPT port. It is not for systems that require a different tube diameter, a different thread standard, or a higher pressure rating than 290 psi.

14 mm push-to-connect with 3/8 inch BSPT

The single specification that decides fit is the combination of a 14 mm push-to-connect end and a 3/8 inch BSPT male thread. Verify both the tube outer diameter and the port thread before ordering.

Highlights

  • Push-to-connect design speeds installation on 14 mm tube
  • Male 3/8 in BSPT thread seals directly into port
  • Pre-applied thread sealant cuts assembly time
  • Brass C36000 body handles 290 psi at 175 °F
  • Pack of ten fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3175 14 17

Questions about this item

What tube outer diameter and thread size does the 3175 14 17 adapter connect?

The push-to-connect side accepts 14 mm tube outer diameter and the male BSPT side is 3/8 inch pipe size.

How do you install the brass push-fit adapter and what step is often missed?

Push the 14 mm tube firmly into the fitting until it seats, then thread the 3/8 in BSPT end into the port; the pre-applied sealant means no extra tape is needed.

When should the brass adapter be replaced under normal vacuum use?

Replace if the collet no longer grips the 14 mm tube securely, if the pre-applied sealant is damaged, or if leakage appears at 290 psi or 175 °F limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.