We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass push-fit connectors, silver finish, 5/16 tube to 3/8 NPT thread

Legris

Legris 3175 08 18 Male Connector 5/16 OD x 3/8 NPT PK10

SKU CH-BMXP-D0G6N MPN 3175

Pack of ten push-fit brass fittings connecting 5/16 inch tube to 3/8 inch NPT threads, rated to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • Push-to-connect design speeds installation on 5/16 in tubing
  • Male NPT thread seals directly into 3/8 in ports
  • Brass C36000 body handles 290 psi at 175 °F
  • Pre-applied thread sealant cuts assembly time
  • Pack of 10 covers multiple connection points

Push-Fit Brass Fitting

This Legris push-fit fitting joins 5/16 inch OD tubing to a 3/8 inch male NPT thread. The brass body uses C36000 grade material and includes pre-applied thread sealant. Rated for 290 psi maximum pressure and 175 degrees F maximum temperature. Supplied in a pack of 10 pieces.

Suits vacuum lines and push-fit systems

Installers needing a quick-connect transition from tubing to female-threaded ports will find this fitting convenient. Builders requiring compression, flare or welded joints should select a different connection style. The pack quantity may exceed needs for single repairs.

5/16 inch tube to 3/8 NPT thread

The critical specification is the combination of 5/16 inch outer diameter push-to-connect on one end and 3/8 inch male NPT on the other. Verify both dimensions against your tubing and port before ordering.

Highlights

  • Push-to-connect design speeds installation on 5/16 in tubing
  • Male NPT thread seals directly into 3/8 in ports
  • Brass C36000 body handles 290 psi at 175 °F
  • Pre-applied thread sealant cuts assembly time
  • Pack of 10 covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3175 08 18

Questions about this item

What tube size must I already have to connect to the 5/16 inch push-fit end?

You need tubing with a 5/16 inch outer diameter for the push-to-connect side to seal properly.

Will the 3/8 inch NPT male threads mate with my existing 3/8 inch female NPT ports?

Yes, the 3/8 inch MNPT side threads directly into standard 3/8 inch female NPT ports.

How can I confirm the fitting is holding pressure after installation?

Pressurise the system up to 290 psi and check for leaks; the pre-applied sealant and push-fit grip should maintain a tight seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.