We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit connector, silver finish, pack of ten

Legris

Legris 3175 04 10 Male Connector 5/32 in Tube 1/8 in Pipe Brass PK10

SKU CH-VSTN-33X4V MPN 3175

Push-to-connect brass fitting joins 5/32 inch tube to 1/8 inch MBSPT thread, rated 290 psi and 175 °F, pack of ten

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design enables quick assembly without tools
  • Brass C36000 construction resists corrosion for long service life
  • Pre-applied thread sealant prevents leaks at the 1/8 in MBSPT connection
  • Rated to 290 psi and 175 °F for demanding vacuum applications
  • Pack of ten connectors covers multiple installation points

Push-Fit Adapter for Vacuum Applications

This brass push-fit adapter connects 5/32 inch outer diameter tubing to a 1/8 inch male BSPT pipe thread. It is designed for vacuum use and includes pre-applied thread sealant. The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit.

Suitable for Vacuum Lines and Brass Systems

Engineers assembling vacuum circuits with 5/32 inch tubing and 1/8 inch BSPT ports will find this fitting appropriate. It is not suited for applications exceeding the stated pressure or temperature limits. Buyers who need a different tube diameter or thread standard should look at other fittings.

5/32 Inch Tube to 1/8 Inch BSPT Connection

The critical specification is the combination of a 5/32 inch push-to-connect tube end and a 1/8 inch male BSPT thread end. This exact pairing determines whether the adapter fits the intended tubing and port. Verify both dimensions against your system requirements before purchase.

Highlights

  • Push-to-connect design enables quick assembly without tools
  • Brass C36000 construction resists corrosion for long service life
  • Pre-applied thread sealant prevents leaks at the 1/8 in MBSPT connection
  • Rated to 290 psi and 175 °F for demanding vacuum applications
  • Pack of ten connectors covers multiple installation points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3175 04 10

Questions about this item

Will the 5/32 in push-to-connect side seal reliably on the semi-rigid nylon tubing I already have installed?

The push-to-connect design grips 5/32 in OD tubing without tools; brass body and pre-applied sealant give a leak-free joint up to 290 psi and 175 °F.

How can I verify the 1/8 in MBSPT thread is sealing properly once I thread it into my existing port?

The pre-applied thread sealant coats the 1/8 in MBSPT threads; after hand-tight plus one to two turns with a wrench, pressurise to working pressure and check for bubbles — no leaks means it is seated.

Does the pack of ten include any extra sealing washers or thread tape, or must I buy them separately?

Each connector has thread sealant already applied to the 1/8 in MBSPT side; no separate washers or tape are required or supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.