We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with push-to-connect tube end and threaded pipe end

Legris

Legris 3113 56 11 Male Elbow 1/4 Tube 1/8 Pipe Trap PK10

SKU CH-F24R-Z8V1J MPN 3113

Push-fit male elbow connects 1/4 inch tube to 1/8 inch NPT pipe, rated 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect elbow joins 1/4 in tube to 1/8 in NPT
  • Pre-applied thread sealant speeds installation
  • Fiberglass-reinforced nylon resists chemicals and impact
  • Pack of 10 fittings covers multiple connections
  • Rated 290 psi at 175 °F for vacuum lines

Push-Fit Elbow Fitting

This push-fit elbow fitting joins a 1/4 inch tube to a 1/8 inch male pipe thread. The pack contains ten pieces for multiple connections. It is designed for vacuum applications in automotive and plumbing systems. The fiberglass-reinforced nylon body resists corrosion and vibration.

Mechanics needing quick tube-to-pipe joints

Technicians who need a fast, tool-free seal on 1/4 inch tubing will find this fitting suitable. It is not intended for installers who require a compression or flare connection method. Buyers needing a straight connector or a different thread size should select another part. The pre-applied sealant removes the need for separate thread tape.

Maximum operating pressure 290 psi

The fitting withstands up to 290 psi at 175 degrees Fahrenheit. This pressure rating determines whether the part matches the system requirements. Exceeding this limit risks leaks or fitting failure. Verify the system pressure before installation.

Highlights

  • Push-to-connect elbow joins 1/4 in tube to 1/8 in NPT
  • Pre-applied thread sealant speeds installation
  • Fiberglass-reinforced nylon resists chemicals and impact
  • Pack of 10 fittings covers multiple connections
  • Rated 290 psi at 175 °F for vacuum lines

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3113 56 11

Questions about this item

Will the pre-applied thread sealant on the 1/8 inch NPT threads need reapplication after installation?

The pre-applied thread sealant is designed for the initial installation; if the fitting is removed and reinstalled, fresh sealant should be applied to ensure a leak-free connection.

At 290 psi maximum operating pressure, what is the first limitation reached during continuous high-pressure use?

The 290 psi rating is the maximum operating pressure; sustained use at or near this limit will stress the fiberglass-reinforced nylon body and push-to-connect seals before any other component.

How does the fitting handle heat when running continuously at the 175 °F maximum temperature?

The fiberglass-reinforced nylon material is rated for continuous operation up to 175 °F; at this temperature the fitting maintains its structural integrity and seal performance without degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.