Legris 3109 62 17 Push-Fit Elbow Fitting 1/2 in tube 3/8 in MBSPT 290 psi 175°F

Push-Fit Elbow for 1/2 in Tube

The Legris 3109 62 17 is a push-fit elbow fitting designed to join 1/2 inch tubing to a 3/8 inch MBSPT threaded port. It suits pneumatic or vacuum systems that need a quick, tool-free connection at a right angle. The fiberglass-reinforced nylon body resists corrosion and weighs less than metal alternatives. Installers in maintenance, automation or fluid-handling roles will find it straightforward to fit.

Fits into a system without threading the tube

Side A uses a push-to-connect design that grips the tube when it is inserted, eliminating the need for tube threading, flaring or separate ferrules. Side B provides a 3/8 inch MBSPT male thread with pre-applied sealant, so the fitting screws directly into a matching female port without extra tape or paste. This combination frees up assembly time and reduces the number of loose components a technician must carry.

Pressure headroom up to 290 psi and 175°F

The fitting is rated for a maximum operating pressure of 290 psi and a maximum temperature of 175 degrees F, giving ample margin for typical shop-air and vacuum lines. It is not intended for hydraulic systems that exceed these limits or for applications that require metal-bodied fittings for fire safety or chemical compatibility. Buyers needing higher pressure ratings or different thread standards should look elsewhere.