We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with 90-degree bend, pack of 10

Legris

Legris 3109 60 14 Push-Fit Elbow 90 Deg 3/8 Tube 1/4 MNPT Black PK10

SKU CH-N7DQ-0H3KE MPN 3109

Connects 3/8 in tube to 1/4 in MNPT with push-fit 90-degree elbow, rated 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-fit connection speeds installation with no tools required
  • 90-degree elbow routes 3/8 in tube to 1/4 MNPT in tight spaces
  • Fiberglass-reinforced nylon body withstands 290 psi and 175 °F
  • Pre-applied thread sealant on MNPT end prevents leaks instantly
  • Pack of 10 fittings covers multiple connection points

Push-Fit Elbow for 3/8 in Tube

This Legris 3109 60 14 elbow connects 3/8 in outer-diameter tubing to a 1/4 in male NPT thread at a 90-degree angle. The push-to-connect design allows tool-free assembly for vacuum and fluid lines. Supplied as a pack of 10 black fittings.

Rated 290 psi at 175 Degrees F

The fiberglass-reinforced nylon body handles a maximum operating pressure of 290 psi and a maximum temperature of 175 degrees Fahrenheit. Pre-applied thread sealant on the MNPT side speeds installation and helps prevent leaks.

Needs 1/4 MNPT port and 3/8 in tubing

Install into any 1/4 in male NPT port; the push-fit end accepts 3/8 in tubing without clamps or tools. The right-angle shape routes lines tight against equipment, freeing space in crowded engine bays or pneumatic panels.

Highlights

  • Push-fit connection speeds installation with no tools required
  • 90-degree elbow routes 3/8 in tube to 1/4 MNPT in tight spaces
  • Fiberglass-reinforced nylon body withstands 290 psi and 175 °F
  • Pre-applied thread sealant on MNPT end prevents leaks instantly
  • Pack of 10 fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 60 14

Questions about this item

How does the 290 psi rating work when the fitting is installed in a real system?

The 290 psi maximum operating pressure is the limit the fiberglass-reinforced nylon body and push-to-connect seal can hold at up to 175 °F; system pressure must stay below this value.

What does the 1/4 MNPT thread actually seal against in practice?

The 1/4 in MNPT tapered thread seals in a matching female NPT port; pre-applied thread sealant is included to fill the spiral leak path when tightened.

What clearance does the 90-degree elbow need to fit the 3/8 tube and 1/4 MNPT connection?

The elbow turns the 3/8 in tube 90 degrees into a 1/4 in MNPT port; allow enough space for the tube to enter the push-to-connect side and for a wrench on the hex to tighten the MNPT side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.