We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow trap 16mm tube by half-inch BSPP male thread

Legris

Legris 3109 16 21 Push-Fit Elbow Trap 16mm x 1/2 in BSPP

SKU CH-C3EC-PP4AK MPN 3109

Push-fit elbow connects 16 mm tube to 1/2 in BSPP male thread, rated 290 psi and 175 °F

  • TypeDrain Components
  • Push-to-connect design speeds installation with 16 mm tube
  • Male BSPT 1/2 in thread fits standard plumbing ports
  • Fiberglass-reinforced nylon body resists corrosion and vibration
  • Pre-applied thread sealant cuts assembly time and prevents leaks
  • Rated to 290 psi and 175 °F for demanding vacuum lines

Push-Fit Elbow Trap 16 mm

This push-fit elbow trap connects a 16 mm tube to a 1/2 in BSPP male thread. The fiberglass-reinforced nylon body is rated for 290 psi and 175 degrees Fahrenheit. It suits vacuum applications in plumbing or compressed-air systems.

Check thread and tube compatibility

Verify that the existing port accepts a 1/2 in BSPP male thread and that the tube outer diameter is exactly 16 mm. The fitting includes pre-applied thread sealant so no additional tape is required. Confirm the system pressure and temperature stay within the stated limits.

Fits vacuum lines and frees assembly time

The push-to-connect end locks onto the tube without tools while the male thread screws into the mating port. The elbow geometry routes the line around obstacles in tight spaces. The integrated sealant speeds installation and reduces leak paths.

Highlights

  • Push-to-connect design speeds installation with 16 mm tube
  • Male BSPT 1/2 in thread fits standard plumbing ports
  • Fiberglass-reinforced nylon body resists corrosion and vibration
  • Pre-applied thread sealant cuts assembly time and prevents leaks
  • Rated to 290 psi and 175 °F for demanding vacuum lines

Specifications

TypeDrain Components
BrandLegris
Model3109 16 21

Questions about this item

Does the Legris 3109 16 21 elbow come with thread sealant or must I buy it separately?

The fitting includes pre-applied thread sealant on the BSPT side, so no separate sealant is required for installation.

Which tube size and thread combination does the 3109 16 21 model provide?

This model connects a 16 mm push-to-connect tube on one side to a 1/2 in male BSPT thread on the other.

What do the 290 psi and 175 °F ratings mean for daily use?

The fitting is rated for continuous operation up to 290 psi and 175 °F, suitable for vacuum and compressed-air lines within those limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.