We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten black push-fit elbow fittings with 14mm tube and half-inch male thread

Legris

Legris 3109 14 21 Male Elbow Trap 14mm 1/2in PK10

SKU CH-W4WA-8BXP6 MPN 3109

Push-fit elbow connects 14 mm tube to 1/2 in BSPT male thread, rated to 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Pack of ten fittings speeds multi-point plumbing installs
  • 14 mm push-to-connect joins tubing without tools
  • 1/2 in male BSPT thread seals directly into ports
  • Fibre-reinforced nylon withstands 290 psi and 175 °F
  • Pre-applied thread sealant cuts assembly time per joint

14 mm push-fit elbow for vacuum lines

The Legris 3109 14 21 is a black fiberglass-reinforced nylon fitting that joins 14 mm tubing to a 1/2 inch male BSPT port. It is supplied as a pack of 10 pieces for pneumatic or vacuum circuits.

Check tube diameter and thread standard

Verify that your existing line uses 14 mm outer-diameter tubing and that the receiving port accepts a 1/2 inch male BSPT thread. The fitting handles up to 290 psi and 175 degrees F, so confirm your system stays within those limits.

Pre-applied sealant speeds assembly

Each elbow arrives with thread sealant already on the male end, removing the need for tape or paste during installation. The push-to-connect side grips the tube without tools, cutting fitting time on vacuum or low-pressure pneumatic work.

Highlights

  • Pack of ten fittings speeds multi-point plumbing installs
  • 14 mm push-to-connect joins tubing without tools
  • 1/2 in male BSPT thread seals directly into ports
  • Fibre-reinforced nylon withstands 290 psi and 175 °F
  • Pre-applied thread sealant cuts assembly time per joint

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 14 21

Questions about this item

What comes in the pack and do I need extra sealant or tools?

The pack contains ten push-fit elbow fittings with pre-applied thread sealant already on the threads, so no separate sealant is required; only a tube cutter or deburring tool for the 14 mm tube is needed.

How do I choose between the 14 mm tube and 1/2 in pipe versions listed?

This single model joins a 14 mm outer-diameter tube on the push-to-connect side to a 1/2 in MBSPT threaded pipe on the other; there is no separate version to select.

What does the 290 psi rating mean when the fitting is installed in a vacuum line?

The 290 psi maximum operating pressure is the limit for positive pressure; in vacuum service the fitting is rated for full vacuum at up to 175 °F, so it will hold vacuum without leaking within that temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.