We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with 10 mm tube end and 3/8 NPT thread

Legris

Legris 3109 10 18 Push-Fit Elbow Trap 10 mm 3/8 in NPT 290 psi 175 °F

SKU CH-1SQW-K1R6C MPN 3109

Push-fit elbow connects 10 mm tube to 3/8 in NPT male thread, rated 290 psi at 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation on 10 mm tubing
  • Pre-applied thread sealant saves time on 3/8 in NPT connections
  • Fibre-reinforced nylon withstands 290 psi working pressure
  • Rated to 175 °F for reliable performance in hot systems
  • Compact elbow shape routes lines neatly in tight spaces

Push-Fit Elbow Fitting for Vacuum Lines

This push-fit elbow fitting connects 10 mm tubing to a 3/8 in NPT male thread in vacuum applications. The fiberglass-reinforced nylon body includes pre-applied thread sealant for a secure seal. It is rated for 290 psi maximum operating pressure and 175 Degrees F maximum operating temperature. The black fitting comes in a pack of ten units.

Suits Pneumatic Installers Needing Quick 90-Degree

Installers who need a tool-free 90-degree joint between metric tubing and NPT threads will find this fitting convenient. It is not suited for systems that exceed the stated pressure or temperature limits. Buyers who require a straight connector or a different tube diameter should look at other configurations. Those needing metal threads or higher chemical resistance must select alternative materials.

10 mm Push-to-Connect to 3/8 in NPT Male Thread

The defining specification is the combination of a 10 mm push-to-connect port on one side and a 3/8 in NPT male thread on the other. This exact interface determines whether the fitting matches the tubing and port in your vacuum circuit. Verify both the tube outer diameter and the thread standard before ordering.

Highlights

  • Push-to-connect design speeds installation on 10 mm tubing
  • Pre-applied thread sealant saves time on 3/8 in NPT connections
  • Fibre-reinforced nylon withstands 290 psi working pressure
  • Rated to 175 °F for reliable performance in hot systems
  • Compact elbow shape routes lines neatly in tight spaces

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 10 18

Questions about this item

Does the 290 psi rating or 175 °F limit create noise or heat during continuous use?

The fitting has no moving parts and generates no noise or heat; the 290 psi and 175 °F figures are maximum operating limits, not sources of emission.

What tube and thread must already be on site for the 10 mm push-fit and 3/8 in NPT ends to connect?

You need 10 mm outer-diameter tubing for the push-to-connect side and a female 3/8 in NPT port for the male thread side.

Will the fiberglass-reinforced nylon body and pre-applied sealant work with older metal piping systems?

Yes, the nylon body resists corrosion and the included sealant provides a reliable thread seal on existing metal NPT ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.