We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting 6mm tube 1/4in thread pack of 10

Legris

Legris 3109 06 13 Male Elbow 6mm 1/4in PK10

SKU CH-168V-AE8NJ MPN 3109

Push-fit elbow connects 6 mm tube to 1/4 in male thread, rated 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • MaterialPlastic/Metal Combination
  • ColorBlack
  • Push-to-connect design speeds up vacuum line assembly
  • 6 mm tube fits directly into 1/4 in male BSPT thread
  • Pre-applied thread sealant prevents leaks without extra tape
  • Fibre-reinforced nylon body handles 290 psi at 175 °F
  • Pack of 10 fittings covers multiple connection points

Push-Fit Elbow for 6 mm Tube

This Legris 3109 fitting connects a 6 mm push-to-connect tube to a 1/4 inch male BSPT thread. It suits pneumatic and vacuum lines where a compact 90-degree turn is required. The pack contains ten identical elbows for multi-point installations. Each fitting is new and ready for immediate use.

290 psi Pressure Rating

The maximum operating pressure is 290 psi, which determines whether the fitting matches the system design pressure. Exceeding this limit risks leakage or fitting failure. The pre-applied thread sealant helps achieve a reliable seal on the threaded side without extra tape or paste. Verify the system pressure before installation.

175 °F Temperature Limit

Sustained operation up to 175 °F is supported by the fiberglass-reinforced nylon body. Continuous exposure above this temperature can degrade the material and reduce sealing performance. The fitting is not intended for high-temperature hydraulic circuits or steam lines. Use within the stated thermal envelope for reliable service life.

Highlights

  • Push-to-connect design speeds up vacuum line assembly
  • 6 mm tube fits directly into 1/4 in male BSPT thread
  • Pre-applied thread sealant prevents leaks without extra tape
  • Fibre-reinforced nylon body handles 290 psi at 175 °F
  • Pack of 10 fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialPlastic/Metal Combination
ColorBlack
BrandLegris
Model3109 06 13

Questions about this item

How does the 290 psi pressure rating hold up when the fitting is installed in a live vacuum line?

The fitting is rated for a maximum operating pressure of 290 psi, so it will maintain a seal at typical vacuum levels well below that limit.

What does the MBSPT 1/4 in thread actually seal against in practice?

The male BSPT thread seals on the tapered pipe threads, and the pre-applied thread sealant is included to prevent leaks without extra tape.

Will the 6 mm push-to-connect side accept standard 6 mm nylon tubing without an insert?

Yes, the push-to-connect port is designed for 6 mm outer diameter tubing and grips the tube directly with its internal collet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.