We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting, pack of 10

Legris

Legris 3109 04 14 Male Elbow 5/32 in 4mm PK10

SKU CH-ERMN-C4Z8G MPN 3109

Pack of ten push-fit male elbow fittings connect 5/32 in tubing to 1/4 in NPT threads, rated 290 psi at 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation on 5/32 in tubing
  • Pre-applied thread sealant eliminates extra sealing steps on 1/4 in NPT threads
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum applications
  • Pack of ten fittings covers multiple connection points

Push-Fit Male Elbow Fitting

This push-fit male elbow connects 5/32 inch tubing to a 1/4 inch male NPT thread. The body is moulded from black fiberglass-reinforced nylon for chemical resistance. A pack contains ten fittings ready for installation. Pre-applied thread sealant on the male end speeds up sealing.

Suits Pneumatic and Vacuum Lines

The fitting handles vacuum service and pressures up to 290 psi at temperatures up to 175 degrees F. It is not for hydraulic systems that exceed the pressure rating or for potable water lines. Installers needing a different tube diameter or thread size should select another model.

5/32 Inch Tube to 1/4 Inch MNPT

The critical specification is the combination of a 5/32 inch push-to-connect port and a 1/4 inch male NPT thread. Verify both dimensions against your tubing and port before ordering.

Highlights

  • Push-to-connect design speeds installation on 5/32 in tubing
  • Pre-applied thread sealant eliminates extra sealing steps on 1/4 in NPT threads
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F in vacuum applications
  • Pack of ten fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 04 14

Questions about this item

What size tube do I need to connect to the 5/32 in push-to-connect side of this Legris 3109 elbow?

The fitting accepts a tube with a 5/32 in outer diameter, which is also listed as 4 mm.

Can I thread the 1/4 in MNPT side into an existing metal port without adding sealant?

Yes, the male NPT thread comes with pre-applied thread sealant so no extra compound is required.

How can I confirm the joint is holding at the rated 290 psi after installation?

Pressurise the system to its working pressure and check the push-to-connect and threaded joints for leaks; the fitting is rated to 290 psi and 175 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.