We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black push-fit elbow fittings 4mm tube 1/8 MNPT 90 degree

Legris

Legris 3109 04 11 Push-Fit Elbow 90 Deg 4mm Tube 1/8 MNPT Black PK10

SKU CH-H0N8-MYF42 MPN 3109

A push-fit 90-degree elbow connects 4 mm tubing to 1/8 MNPT threads, rated to 290 psi and 175 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect fitting speeds up installation
  • 90-degree elbow routes tubing in tight spaces
  • 1/8 inch MNPT thread seals with pre-applied sealant
  • Fiberglass-reinforced nylon handles 290 psi and 175 °F
  • Pack of 10 fittings covers multiple connection points

Push-Fit Elbow Fitting

This Legris 3109 04 11 push-fit elbow joins 4 mm tube to a 1/8 MNPT thread at a 90 degree angle. The fiberglass-reinforced nylon body includes pre-applied thread sealant for a ready-to-install connection. Rated for 290 psi and 175 degrees F, it suits vacuum and fluid lines in automotive and industrial plumbing. The pack contains ten black fittings for repeat installations.

Who This Suits

Technicians needing a compact right-angle transition from metric tubing to NPT threads without tools or clamps will find this fitting convenient. Buyers who require a straight connector, a different thread size, or a metal-bodied fitting for higher temperature service should look at alternative configurations.

Deciding Specification

The critical detail is the combination of 5/32 in push-to-connect tube diameter and 1/8 MNPT thread on a single 90 degree elbow. If your system uses 4 mm tube and a 1/8 NPT port, this part matches; any other tube or thread size makes it incompatible.

Highlights

  • Push-to-connect fitting speeds up installation
  • 90-degree elbow routes tubing in tight spaces
  • 1/8 inch MNPT thread seals with pre-applied sealant
  • Fiberglass-reinforced nylon handles 290 psi and 175 °F
  • Pack of 10 fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3109 04 11

Questions about this item

What tube outer diameter fits the push-to-connect side of the Legris 3109 04 11 elbow?

The push-to-connect side accepts 4 mm tube, which is equivalent to 5/32 in outer diameter.

How do I install the 1/8 MNPT threaded end of this fitting, and what step is often missed?

Thread the 1/8 MNPT end into the female port by hand, then tighten with a wrench; the pre-applied sealant means no extra tape or paste is needed.

When should I replace the Legris 3109 04 11 elbow in a vacuum line?

Replace it if you see cracks in the black fiberglass-reinforced nylon body, persistent leaks at the push-to-connect grip, or if operating conditions exceed 290 psi or 175 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.