We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree push-fit elbow fitting, 1/2 inch tube, pack of ten

Legris

Legris 3102 62 00 90 Deg Push-Fit Elbow 1/2 In Tube PK10

SKU CH-VMYY-SZ5N1 MPN 3102

Connects two half-inch tubes at a right angle using push-to-connect ends rated to 290 psi and 176 degrees Fahrenheit, supplied in a pack of ten

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • 90-degree elbow routes air lines in tight spaces
  • Push-to-connect ends join 1/2 in tube without tools
  • Fiberglass-reinforced nylon body handles 290 psi and 176 °F
  • Black finish identifies the fitting in complex systems
  • Pack of ten supplies multiple connection points

Push-Fit Elbow for 1/2 Inch Tube

The Legris 3102 62 00 is a 90-degree push-fit elbow designed for 1/2 inch outer-diameter tubing. It connects two tube ends in air-line systems using a tool-free push-to-connect design on both ports. The pack contains ten identical black fittings made from fibre-glass-reinforced nylon.

Installation notes

Push each tube firmly into the fitting until it seats; no thread sealant is required or supplied. The most common issue is insufficient insertion depth, which can cause leaks or tube release under pressure. Ensure tubing is cut square and free of burrs before assembly.

Capacity and headroom

Rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 176 degrees F, the elbow handles typical compressed-air circuits with margin. It is not suited for hydraulic pressures or temperatures beyond the stated limits.

Highlights

  • 90-degree elbow routes air lines in tight spaces
  • Push-to-connect ends join 1/2 in tube without tools
  • Fiberglass-reinforced nylon body handles 290 psi and 176 °F
  • Black finish identifies the fitting in complex systems
  • Pack of ten supplies multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3102 62 00

Questions about this item

How can I verify the 90-degree push-fit elbow is seated correctly after installation?

Press each 1/2 in tube firmly into the push-to-connect ports until it stops; a secure joint will not pull free under hand pressure and should hold the rated 290 psi at up to 176 °F.

What comes in the PK10 pack and are any extra seals or tools required?

The pack contains ten black fiberglass-reinforced nylon elbows; no thread sealant is pre-applied and none is included, so no additional sealing parts or special tools are needed for the push-fit connections.

Which version should I choose if I need a 1/2 in tube elbow for compressed air at 290 psi?

Model 3102 62 00 is the 90-degree push-fit elbow with 1/2 in tube ports on both sides, rated for 290 psi maximum operating pressure and 176 °F maximum temperature, making it the correct choice for that specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.