We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit adapter with 6 mm tube end and 10 mm male thread

Legris

Legris 3101 06 60 Push-Fit Adapter 6 mm Tube 10 mm Male Thread 13 mm Length

SKU CH-YYHC-02BV2 MPN 3101

Push-fit adapter connects 6 mm tube to 10 mm male thread in 13 mm length

  • TypeDrain Components
  • MaterialHAWA
  • Push-to-connect design enables quick installation with 6 mm tube
  • Male M10 thread fits 10 mm port for secure connection
  • Brass construction withstands 290 psi maximum operating pressure
  • Rated for 175 °F maximum operating temperature in demanding environments
  • Compact 13 mm overall length suits tight plumbing spaces

Push-Fit Adapter for 6 mm Tube

This Legris 3101 push-fit adapter connects a 6 mm outer-diameter tube to a 10 mm male metric thread. The brass body is rated for 290 psi and 175 °F. Overall length is 13 mm and the fitting uses a push-to-connect seal on the tube side.

Suits vacuum lines needing a straight 6 mm to M10

Installers who need a quick-connect joint between 6 mm tubing and a 10 mm male port will find this part fits. It is not for systems that require a female thread, a larger tube bore or a different thread pitch.

6 mm tube to 10 mm male metric thread

The single specification that decides fit is the combination of 6 mm push-to-connect tube size and 10 mm male metric thread. Verify both dimensions against your port and tubing before ordering.

Highlights

  • Push-to-connect design enables quick installation with 6 mm tube
  • Male M10 thread fits 10 mm port for secure connection
  • Brass construction withstands 290 psi maximum operating pressure
  • Rated for 175 °F maximum operating temperature in demanding environments
  • Compact 13 mm overall length suits tight plumbing spaces

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model3101 06 60

Questions about this item

Does the brass body or the push-to-connect seals on the 3101 06 60 need periodic replacement?

The brass fitting is designed for permanent installation; the internal seals are not user-serviceable and the unit is replaced as a whole if leakage occurs.

What pressure or temperature limit will be reached first during continuous operation?

The 290 psi maximum operating pressure is typically the governing limit; the 175 °F temperature rating provides additional margin in most vacuum applications.

How much heat does the adapter generate when vacuum runs all day?

As a passive brass connector it produces no measurable heat; the 13 mm length simply conducts fluid temperature without adding thermal load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.