We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with 1/4 NPT thread and 3/8 tube connection

Legris

Legris 3009 60 14 Female Elbow 1/4 NPT 3/8 Push-Fit PK10

SKU CH-9W6H-9K9NG MPN 3009

Push-fit female elbow connects 3/8 in tube to 1/4 in NPT thread, rated 290 psi and 175 °F, pack of 10

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Push-to-connect design speeds installation with 3/8 in tube
  • Female 1/4 NPT thread mates with standard pipe fittings
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F
  • Pack of 10 fittings covers multiple connection points

3/8 Push-Fit Elbow with 1/4 NPT Thread

This pack contains ten Legris 3009 female elbow fittings that join 3/8 inch push-to-connect tubing to a 1/4 NPT female port. The black fiberglass-reinforced nylon bodies suit vacuum and compressed-air lines up to 290 psi and 175 degrees Fahrenheit.

Pre-Applied Sealant Saves Assembly Time

Each fitting arrives without thread sealant on the NPT side, so installers apply their preferred compound before tightening. The push-to-connect end grips 3/8 inch tubing without tools, reducing installation effort on pneumatic circuits.

Verify Tubing OD and Port Thread Before Ordering

Confirm the system uses 3/8 inch outer-diameter tubing and 1/4 NPT female threads; other sizes will not seal. The 290 psi pressure ceiling and 175 degree Fahrenheit temperature limit must also match the circuit’s operating envelope.

Highlights

  • Push-to-connect design speeds installation with 3/8 in tube
  • Female 1/4 NPT thread mates with standard pipe fittings
  • Fiberglass-reinforced nylon body withstands 290 psi operating pressure
  • Rated for continuous use up to 175 °F
  • Pack of 10 fittings covers multiple connection points

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandLegris
Model3009 60 14

Questions about this item

Will the fiberglass-reinforced nylon body or the pre-applied thread sealant need replacement after extended use?

The fitting uses fiberglass-reinforced nylon rated for 290 psi and 175 Degrees F; the sealant is applied at the factory and is not a serviceable part.

Which limit appears first when the fitting runs continuously at maximum pressure and temperature?

The 290 psi pressure ceiling and 175 Degrees F temperature ceiling are simultaneous hard limits; exceeding either voids the rating.

Does the push-to-connect seal generate heat or noise during all-day vacuum or pressure cycles?

The static push-to-connect and FNPT joints have no moving parts, so they produce no audible noise and no measurable heat rise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.